Search results

Search the forum Search Articles
  1. SickLL7Crenshaw

    What Size Injectors

    I've been in 0* temps in CO and climbed Slumgullion pass which is 11,530ft. Started the truck at 0* around 8500ft. With my 40% inj it hazed for a couple min. Other then that everything was fine
  2. SickLL7Crenshaw

    Tie rods still bend with sleeves

    So your saying worn bars will or may cause the front end to lift more Josh? I figured if a spring was weak it wouldn't take advantage as a strong spring would when weight leaves its tension. So therefore worn bars wouldnt have the force to raise the front of the truck when the weight transfer to...
  3. SickLL7Crenshaw

    Tie rods still bend with sleeves

    What about the tension on the torsion bars with lift keys? It seems my old lb7 with wore out torsion bars hardly rises when I launch. Brian we had a convo about this a couple weeks ago. Would wore out bars help with lifting? Or even lowing keys? My lilys bars are still in good shape and front...
  4. SickLL7Crenshaw

    Tuff Truck Challenge 2k14

    Come on down Jake. Hoping its gonna be a good turnout. I'm hoping everything is a go when that time comes. Sometimes the ranch will put you in a bind about doing things.
  5. SickLL7Crenshaw

    TS Outlaw 10.5 index winner

    Vids???:D
  6. SickLL7Crenshaw

    Tuff Truck Challenge 2k14

    Bumpin the up. Who else is coming? Does anyone know if Garret Bonds will make it this year? Heard his trans is still shot and still waiting on dmitri to build it.
  7. SickLL7Crenshaw

    Newbie

    Welcome!
  8. SickLL7Crenshaw

    LBZ: LBZ white smoke rough idle

    Balance rates should deff tell you if you lost a tip. Dumping fuel in a cyl would indicate a pretty deep - rate. IG your balance rates are good and compression, next I would look at the desired and actual fuel rail pressure. Is your EGR blocked or deleted?
  9. SickLL7Crenshaw

    Odd chattering noise from torque converter area.

    Did you build it yourself? And why did you wait 300 miles to inspect the filter or pan??
  10. SickLL7Crenshaw

    Stock 01 TCM Tune

    PM me your email. Sent from my B15 using Tapatalk
  11. SickLL7Crenshaw

    Tuff Truck Challenge 2k14

    I'm pumped as last year I had a blast! Its very possible that my lily will be on the bottle by the 28th too:D. Thanks Brian for the help on that subject.
  12. SickLL7Crenshaw

    Tuff Truck Challenge 2k14

    June 28th Albuquerque dragway whose going?:woott: besides that does anyone have any info on the event? As in what classes, sponsors, ect. Hopefully be quite a few there. I know Damian, Bri Bri and the AZ crew are gonna make it. I have several friends convoying up to alb to run also. Trying to...
  13. SickLL7Crenshaw

    Stock 01 TCM Tune

    Could be. I know mine won't lock at all until top of 3rd without the box. Doesn't matter if I'm in t/h or normal mode. Sent from my B15 using Tapatalk
  14. SickLL7Crenshaw

    Stock 01 TCM Tune

    Lock box is still needed. Sent from my B15 using Tapatalk
  15. SickLL7Crenshaw

    Engine build

    Engine build thread to going back stock. :spit:
  16. SickLL7Crenshaw

    Tie rods still bend with sleeves

    When I was running 8.0s in the 1/8 I was running 12.4s with a 1.8x 60ft. No lock up box. With lock up box I went 7.8 in the 1/8 with a 1.8x again. Sent from my B15 using Tapatalk
  17. SickLL7Crenshaw

    Tie rods still bend with sleeves

    Who's sleeves were you running and was your t-bars dropped all the way down?
  18. SickLL7Crenshaw

    LB7: questions about s475/stock

    Who does your tuning?? I'm running the s475 over stock on my lly and love it. Been on this setup for 2 years. Factory head bolts also at 126k :thumb:
  19. SickLL7Crenshaw

    Who should do my tuning?

    Wasn't like that earlier today.....
  20. SickLL7Crenshaw

    Anyone in Kansas?

    If you ever make it out this way let me know. Tracks are 10 miles from me.
Top Bottom