Search results

Search the forum Search Articles
  1. MAXX IT OUT

    Info: .83 AR for 73mm turbine wheel

    What would everyone think is high for Drive pressure on a single S36X turbo? I Just swapped to a S369 from a older S366 and jumped about 8 PSI on drive pressure from swapping the clipped turbine to the non clipped turbine on the .83 housing.
  2. MAXX IT OUT

    Info: Quad Turbo Update

    I Guess someone now has as quad turbos up and running. Interesting setup to say the least. https://www.instagram.com/p/BmkSwrkhSR-/?utm_source=ig_share_sheet&igshid=1k3015l4aznuy
  3. MAXX IT OUT

    LB7: Upgraded injector fuel return lines

    I guess I will give those bolts a try, I also order some ARP bolt 12 points bolts for the valve cover. I am getting tired of GMs using crappy grade hardware, I don't think they intended them for anything more than a one time uses.
  4. MAXX IT OUT

    LB7: Upgraded injector fuel return lines

    Currently I am pulling mine valve covers apart to replace a injector on the passenger side, along with the valve cover gasket on the driver side and decided to do a retorque then lash the valves. Most of the injector return bolts are stripping out and I had to use channel lock to get them off...
  5. MAXX IT OUT

    Vehicle Hoist

    What about Asymmetrically or Symmetrically and 2 or 3 stage arms?
  6. MAXX IT OUT

    Vehicle Hoist

    I am looking at getting another hoist in the shop, so I can work on multi able projects at the same time and be able to safely hold heavier trucks. I currently have a 7000 LBS 2 post hoist that I shouldn't really be using for trucks. I am wanting to get a 9000-11000 LBS 2 post with overhead...
  7. MAXX IT OUT

    Info: .83 AR for 73mm turbine wheel

    Well I finally got around to installing the housing this weekend. First impressions, it defiantly lights sooner, but it didn't make as big of a differences as I expected. I think Tony has my tuning so clean on the bottem end that there isn't much to gain without more fuel. I did a trans relearn...
  8. MAXX IT OUT

    lb7 cluster

    Mine does it randomly and generally is for a second then going back to normal, sometimes I lose everything but RPM, Speed, and Oil pressure, the fix for that for me is to either pull the cluster out and put it back in, or just disconnect the battery's. I hope this helps.
  9. MAXX IT OUT

    UCC results and discussion

    Does anyone know what the big cummins guys are running for engine set up's these days? Deckplated and sleeved 6.7 down to 5.9, billet blocks, billet cranks, aftermarket heads? I am just curious to compare how the different groups have been approaching this issue of 2000+ HP vs engine life...
  10. MAXX IT OUT

    Ultimate Callout Challenge ‘18

    The reason for Firepunks success at these events is they have done the hours and hours of testing before the event. So when they show up they know the truck has gone mid 8's regularly, and make the power they need for the dyno and sled pulls. They are not trying to pull off a one hit wonder and...
  11. MAXX IT OUT

    Duramax/4L85E wiring

    How do the factory vans run the 4l85E? I have finally found a engine and trans for my c10 swap, but it doesn't have the ECU's or body harness. How different is the van harness from the truck harness? I have a truck harness and that I was planning on making a standalone, but I am not sure I want...
  12. MAXX IT OUT

    LBZ: My lbz thread (pic heavy)

    I have been on the fence about tinting my truck, but I tow a trailer a fair bit and dark tint+night=can't see shit. So I haven't bothered to do it yet, how dark would you guys go for something like that?
  13. MAXX IT OUT

    What did you do at work today?

    East end of town.
  14. MAXX IT OUT

    What did you do at work today?

    Where are you heading in IA?
  15. MAXX IT OUT

    Wehrli Intake kit GOOD/BAD ????

    Hey Guys, We all have been doing it wrong, this guy has got it all figured out.:roflmao:
  16. MAXX IT OUT

    Wehrli Intake kit GOOD/BAD ????

    Can you share yours? At idle on a 100 degree day your IAT might stay at 100 but what is your charge air temp? As I said before, your intercooler has to be efficient or it will heat soak due to lack of airflow and your temp will go up irregardless of your IAT. What one of the two is the bigger...
  17. MAXX IT OUT

    Wehrli Intake kit GOOD/BAD ????

    In a NA application your right, but for us it all depends on how efficient your intercooler is. With my open filter, my IAT readings is within 10-20 degrees of ambient whenever I am driving, if it was 50+ degrees more I would start getting concerned. Unless your have a Air to Water intercooler...
  18. MAXX IT OUT

    1.6L diesel for 2018 GMC Terrain

    Any update for these engines as far as reliably/MPG, what are they like to drive? I had my sister ask me about the engine as she is looking at a new Terrain.
  19. MAXX IT OUT

    Info: .83 AR for 73mm turbine wheel

    I think the new cover flows better or at least it makes the turbo sound different, but the compressor wheel is the same other than it's probably stronger. The turbine wheel isn't clipped like the box stock turbo and it has the 360 thrust bearings from what I know.
  20. MAXX IT OUT

    Info: .83 AR for 73mm turbine wheel

    I am using a box stock S366 with a SXE 366 cover and compressor wheel.
Top Bottom