Search results

Search the forum Search Articles
  1. MAXX IT OUT

    Info: .83 AR for 73mm turbine wheel

    I When ahead and order a housing, I will try to get some data logs before and after to compare them, besides my butt dyno.
  2. MAXX IT OUT

    Info: .83 AR for 73mm turbine wheel

    Currently with the .91 housing I am seeing about 46 psi boost and 56 psi drive peak, which I don't consider a bad pressure ratio at 1.22 to 1. I am not really sure how much the smaller housing will effect the overall numbers, but what is considered a bad pressure ratio for a single turbo with no...
  3. MAXX IT OUT

    Info: .83 AR for 73mm turbine wheel

    Bumping this back up, since spring is coming and the truck is going to be seeing a trailer more. Is it worth doing or is the newer S366/69 turbine wheel worth upgrading the turbo over just a exhaust housing change. I am not really interested in more peak power, I just want to get rid of my 5th...
  4. MAXX IT OUT

    Remote Oil Filter Setup?

    There isn't a lot of materiel between the second port of the oil filter and the oil passages to the block.
  5. MAXX IT OUT

    Remote Oil Filter Setup?

    I when out and grabbed my spare oil cooler unit, the unit I posted above will not work due to the base being 2 5/8 instead of the 3 5/8 for our filter. It looks like you can tap the oil return passage fairly easy to 13/16-16. Then just remove the pipe nub from the oil filter feed and replace...
  6. MAXX IT OUT

    Remote Oil Filter Setup?

    You are looking for something like this?
  7. MAXX IT OUT

    Help: Which rear end to use

    The newer dodge, 2003 to atleast 2006 and probably newer is very similar to the AAM 11.5 Axle that comes in our trucks from the factory. It would be where I would start.
  8. MAXX IT OUT

    Clean and pricey...

    Thinks Your right, it looks like SparkZ03DMAX's truck. <table width="520" height="45" border="0" cellspacing="6" cellpadding="0"><tbody><tr><td class="alt2"><table width="100%" border="0" cellspacing="6" cellpadding="0"><tbody><tr><td class="alt2"> </td> <td nowrap="nowrap"> </td> <td...
  9. MAXX IT OUT

    Seriously?

    My cousin sent me this one, I guess it works.
  10. MAXX IT OUT

    L5P Injectors

    I am debating giving it a try, but not sure if its just going to be a waste of time. Do you know what a set of heads would Cost? They do look like they could flow very nicely with a little port work. I Believe the Heads bolt pattern is the same but it has one extra head bolt on the LP5 that...
  11. MAXX IT OUT

    L5P Injectors

    Depending on overall size, my thought was just machine a new injector cup to matched the injectors and see about fabricating a set of valve covers. But without knowing what it will take to operate them, its just pissing into the wind.
  12. MAXX IT OUT

    L5P Injectors

    What do we know about these new LP5 injectors? I was doing some browsing last night and came across a site selling stock GM LP5 injectors. 1500 dollars plus 800 dollar core charge for a set of 8. At that price they are cheaper than LB7 injectors and hopefully more reliable. Does anyone know what...
  13. MAXX IT OUT

    Aftermarket factory-appearing Duramax block

    I can't say personally, I am coming in from the point of view that your spending 6000 dollars for maybe a 10-20% gain in block strength which might or might not help with a crankshaft life, narrow journals or not. Again I am referring to a 2000+ HP competition engine not a hot street engine...
  14. MAXX IT OUT

    Aftermarket factory-appearing Duramax block

    What about getting a crank designed that will actually hold up to 2000+ HP reliably and make this block based around it? If your going to buy this block, your probably will be using an aftermarket crank anyway. You probably will end up need different rods to fit this crank, but in the end you...
  15. MAXX IT OUT

    Help: What are you guys Running? Powerservice, Howes, Stanadyne

    Can extra doses hurt anything? Last time I fueled up, about a week ago it was 20, then was up to 40 for a couple days then temp dropped like a stone back to around zero.
  16. MAXX IT OUT

    Help: What are you guys Running? Powerservice, Howes, Stanadyne

    Well I tried to get the 1P2299 filter, but Cat doesn't make that part number anymore. Anyone have another part number to try?
  17. MAXX IT OUT

    Help: What are you guys Running? Powerservice, Howes, Stanadyne

    Well second time this year and below Zero and she gelled up pretty good this go round. I am beginning to lean towards it being too small of a filter. This time i was using howes on a single dose. I currently am using a cat filter 1r-0750 which is a 2 micron filter, Should I step down to a CAT...
  18. MAXX IT OUT

    1/4 mile discussion and time slips post here!

    If I remember right, he was having TCM issues and it would shift into a higher gear to quickly and snuff the turbo. He said something about it in the build thread.
  19. MAXX IT OUT

    Help: What are you guys Running? Powerservice, Howes, Stanadyne

    I stay away from KUM and GO, their diesel is horrible, currently I run QT, GIT N GO, and Casey's. Last year I had no issues, but I guess I need to start taking Diesel samples again.
  20. MAXX IT OUT

    Help: What are you guys Running? Powerservice, Howes, Stanadyne

    Our first big cold snap hit last night(-8), the truck started and ran fine, just 5 minutes down the road it started to gel up. I limped down back back roads to get to work after dumping in some 911 and still wouldn't build pressure past 10K. I have always run powerservice, and only had a couple...
Top Bottom