Search results

Search the forum Search Articles
  1. mike diesel

    Larger compressor pumps (garage)

    Here's the new Kobalt
  2. mike diesel

    Larger compressor pumps (garage)

    I had a 60 gallon, 20 year old, Campbell Hausfeld compressor that I picked up off the local classifieds 2 years ago for $200. It was slightly underpowered with 10.0CFM @ 90psi. I resold it this past Wednesday for $300. I went to Lowes and picked up a Kobalt 60 gallon compressor rated at 11.5CFM...
  3. mike diesel

    Head resurfacing

    GM claims .0079" is the maximum.
  4. mike diesel

    head gasket -.020 over bore

    Use standard bore. They work fine.
  5. mike diesel

    PCV kicking my arse...

    Just run 1 hose off each side down the frame rail. There is no need for that big fitting like that.
  6. mike diesel

    Built Allison limp p0735

    Intermountain....there's your problem.
  7. mike diesel

    Lb7 twin turbo

    Stock trans?
  8. mike diesel

    Issues with GmPartsDirect.com

    I ordered a van thermostat housing from gmpartsdirect but it was back ordered. They emailed me within an hour of placing the order stating it was back ordered and asked if I wanted a refund or if I wanted to wait. I responded and asked for a refund. They emailed back and refunded my money within...
  9. mike diesel

    S400 Turbo Failure

    I always use -6 feed lines on journal bearing chargers. Ball bearing I use -4.
  10. mike diesel

    Fuel cell

    Local hose and rubber supply has everything.
  11. mike diesel

    Industrial pump blew up

    Was it a modified regulator or a stock regulator? If modified, regular tuning won't run right with it. My 85% pumps have standard FPR and work great. I didn't want modified regulators because of the issues people have had with them in the past.
  12. mike diesel

    Industrial pump blew up

    My industrial pumps have been fine. Dual 85% pumps.
  13. mike diesel

    Dropped The Truck Off at HSP Yesterday!

    I love my gt55 but I'd still like to try some triples.
  14. mike diesel

    Pinion bearing failed

    It is one seal. Presses into the t-case.
  15. mike diesel

    Pinion bearing failed

    I set pinion preload with no seal. There are 2 seals. The seal that you hammer into the diff housing and then a seperate one that slides on to the yoke. They call it a wear sleeve.
  16. mike diesel

    Pinion bearing failed

    Yep just the stock steel cover. I'm looking into other covers right now. I saw the OEM finned ones. Put it all together today, the bearing/seal kit came with everything except the pinion wear sleeve. Started filling the diff with fluid and it came pouring out of the pinion. Had to run down town...
  17. mike diesel

    Lock up box and tps error

    2138 and 2140 will be thrown any time the box is used. Typically they are ghost codes and will not set the light.
  18. mike diesel

    Pinion bearing failed

    Everything showed up this afternoon, took it to my work and pressed all the bearings on to the carrier and pinion. Built this fixture out of the old bearing races to press the new bearing races into the diff housing. Hit it with an impact and they sink right in. Got the pinion in and...
  19. mike diesel

    Doing head studs and gaskets going for 650-700hp

    $5k for rods and pistons and "be done with it"...what world are you living in?
  20. mike diesel

    Pinion bearing failed

    This is what I'm hoping:woott:
Top Bottom