Search results

Search the forum Search Articles
  1. duramaxzak

    LML Finally had enough!!!

    Its on my list of things to do after pulling season is over!
  2. duramaxzak

    LML Finally had enough!!!

    I ended up ordering a S&B dry filter intake for the LML also. I will be doing some pulling with it this weekend, interested to see how it pulls on the "heavy tow tune" compared to stock. So far its looking like I gained about 3mpg driving back and forth to work.
  3. duramaxzak

    Dayco SFI balancer?

    Huh, that's the first time I've heard of a Dayco balancer!
  4. duramaxzak

    Where are the best vacation spots you have been?

    Me and the wife went on an Alaskan cruise last year and had a great time!
  5. duramaxzak

    Clicking sound in the rear when turning

    Yes, you will hear a clicking with a Yukon Grizzly locker when turning.
  6. duramaxzak

    New flex plate install

    One of these!
  7. duramaxzak

    New flex plate install

    That's probably not going to work. The balancer bolt will just loosing. You need a way to lock the flywheel. Mine were a SOB to get loose, I had to heat them and use a impact to get them loose! I replaced them with Arp's.
  8. duramaxzak

    Best head gasket choice

    I used Victor's on my build.
  9. duramaxzak

    LBZ: 1st Sled Pull

    :thumb:
  10. duramaxzak

    Question: GM IFS suspension set-up

    I'm not sure if it really gives you anymore traction, but it does give you alot more control over what your front suspension is going to do. It's nice being able to adjust the valving and also getting rid of the torsion bars and cross member.
  11. duramaxzak

    LBZ: 1st Sled Pull

    Mud tires do not work well for pulling, they grab too much! Thats why your hopping. Go to a all terrain style tire, 4lo 3rd gear, ease it off the line and than put it to the rug!!!
  12. duramaxzak

    LBZ: 1st Sled Pull

    Bad idea!!!
  13. duramaxzak

    Funny pics thread

  14. duramaxzak

    Funny pics thread

  15. duramaxzak

    anyone deal with motorsport diesel aka wicked

    423-631-0631
  16. duramaxzak

    anyone deal with motorsport diesel aka wicked

    I found the best way to get ahold of them is by phone. I had them test a pump I had of there's about 2 years ago. I think it was $90 to test it.
  17. duramaxzak

    Lml fml

    I already had the NOX sensors replaced under warranty. My truck has picked up about 3mpg according to the DIC after the delete. I am going to have to hand calculate it to see if it accurate, but seem to be using less.
  18. duramaxzak

    Lml fml

    Was it P0420 Catalyst System Efficiency Below Threshold? That's what I was getting, it wasn't regening it self. It would eventually put it in to "reduced power mode" and set code P2463. This is why my truck is deleted now!
  19. duramaxzak

    Made It To The Track!

    Eric, Good to see your hard work paying off finally! :nana3:
  20. duramaxzak

    Hood stack

    I have a Grand Rock hood stack kit on my puller with a 7" stack. The hood ring is stainless steel, but not polished.
Top Bottom