Search results

Search the forum Search Articles
  1. durallymax

    Weight Bracket

    I wish i could run those weights all year. They are so nice to handle and look good. But unfortuneatly i cant. and Im not about to buy a set of those $$$$$$$$$$$
  2. durallymax

    Twins almost done!!

    exactly. Even if you are a good welder this is the method I would use. Use the grinder to get it the weld down for the most part, then switch to the flap wheel to smooth it out. Then grab the welder and fill in any holes. Doing this is the best way to find potential leaks also. If you...
  3. durallymax

    Turbo breakin?

    had a loose fuel line:D I did the same as many, poured some oil in the turbo, then let it idle for a little while.
  4. durallymax

    Hey BTPA Guys, hitch question

    well here it is all finished for the most part. Still need to add the bump stops and paint of coarse. Its a little overbuilt and weighs about 100-150lbs, but I dont think Ill be twisting it anytime soon.
  5. durallymax

    My Progress

    Its crunch time now. We have a lot of work to do. UPS guy didnt show up with the parts like I had hoped. Im waiting on my intake adapter, banks pipe, and dipstick tube. And my front diff wasnt done like I had hoped. But we stayed busy all afternoon. Got the hitch done and some other little...
  6. durallymax

    Weight Bracket

    here it is loaded up with new style magnum weights.
  7. durallymax

    Weight Bracket

    actually now we decided tonite that since we dont have time to get it set up for IH weights due to the tab on them, I will be running New MX Magnum weights which bring it back even further. we did some more trimming in some spots and it slides nicely now. Ill get some specs up for those who...
  8. durallymax

    My Progress

    well we have 4 days left. and still have enough left to do. Tomorrow niight should be a long one. Im expecting my dipstick tube, banks IC tube and vibrant 4-5" adapter for the intake. My differential will be done tomorrow as well so well get that thrown in and the wiring done and run into...
  9. durallymax

    Hey BTPA Guys, hitch question

    Well here is what it is. I cut two pieces of 3x4" 1/2" thick angle iron to use as the brackets that bolt to the frame. Welded in between the two brackets are two pieces of 4x4" tube with a 3/8" wall. One at the front and one at the back. I also notched the tube to accept the 3x3" tube with...
  10. durallymax

    Driveshaft loops.

    unfortuneatley we didnt go that route, so yes the driveshaft has to be unbolted and the loops slid off. There is a lot of work going into just getting ready for this pull, but im spending a lot of time making sure everything is right as all of these parts are for the pulls this summer as...
  11. durallymax

    Driveshaft loops.

    So i think what your saying is I need to cut the cage in half and make a sort of slip joint so that one half can slide in and out of the other half?? I will probably do this then, sounds like a smart simple way to do it. thanks. I was out of ideas. We were going to end up just making them...
  12. durallymax

    Weight Bracket

    o ok just so were clear I figured you were. No big deal. As for the leak, no i didnt get it fixed yet, but it randomly quit on me. Hasnt been leaking lately. I did order a gasket for that plate and will be throwing that on to see if it stops the leak. Our tracer dye test did determine that...
  13. durallymax

    Weight Bracket

    I know your just trying to help, Im just a little on the edge, Im sorry if I sound like an ass, not trying to, but like I said im on the edge and just very fatigued and going through some hard times personally, and to asdd to that I can never tell if josh is trying to be a smartass or an actual...
  14. durallymax

    Weight Bracket

    once again read the original post.
  15. durallymax

    Ever Seen a Green Stack??

    flat black is boring and everybody does it. Doing nothing wouldve looked bad. Straight green or straight blue looked too "ricey" So i mixed them to tone it down. Definately gonna get some interesting looks with this one.
  16. durallymax

    Ever Seen a Green Stack??

    Now you have. We painted the indoor stack tonite. I started it at 5:30 and finsihed at midnight. When I started it was just the rough pipe with rough welds, stickers and surface rust from sitting in the other shop for a few weeks. I started by roughly grinding the welds down with a grinding...
  17. durallymax

    Weight Bracket

    No kidding, thats why I mention it in my original post.
  18. durallymax

    Hey BTPA Guys, hitch question

    well Ill either do 4x4x3/8 or 3x3x1/2. Not sure which one though. I guess Ill just see whats most convient up at work.
  19. durallymax

    Driveshaft loops.

    I havent gotten that far but most likely just for pulling use. The entire "cage" is one peice however it is not mounted yet and I dont know the best way to go about making it so it travels with the suspension. thus I will most likely make is solid with the suspension blocked and remove if I...
  20. durallymax

    C1 return spring/Output shaft nut

    haha nice. Ive gotten plenty of shit for that when people stop over.
Top Bottom