Search results

Search the forum Search Articles
  1. 24vchevy

    P0756 & p0877

    Hey need some help please, 2007 LBZ. Limp mode, shift inhibited, rpm limited, stuck in one gear, has reverse if you coax it. Have replaced the internal wiring hardness, the pressure switch assembly. Shift solenoid #2. Have tried another TCM. New filters oil level good. Put a pressure...
  2. 24vchevy

    Parrallel twins or triples?

    I am leaning toward the triple set up too. I do remember you, i also don't know how you passed tech with all rubber stems, lol. I measured the s400 and it is a 73mm compressor, thought it wad bigger. So with the two 66 on turbine divertor valves and a s472 should be good to go. I am also using...
  3. 24vchevy

    Parrallel twins or triples?

    We are staring the Impala build and want your guys opinion on which way to go. First off i want to stay away from spray. I have supplied by BD power a pair of s300 with 66 mm compressors and a pair of their turbine diverters. Is this enough air for 1000+ hp? The other way is do make a triple...
  4. 24vchevy

    Cylinder head porting and flow

    Yup I have bought from guy for this project. Was just curious what CFM is possible from the stock castings. Thanks Malcolm
  5. 24vchevy

    Cylinder head porting and flow

    Hi was curious what kind of flow a LBZ head can be ported out to. Thanks Malcolm
  6. 24vchevy

    Cracked Exhaust Ports

    Does II even do the work in house, I thought that a third party build all the hard part i.e. heads I am not sure on this.. Malcolm
  7. 24vchevy

    going for 2k today

    Wow, can i put that set up in my impala and launch to the moon? Good job. Malcolm
  8. 24vchevy

    LB7: Hard start issue fuel rated.

    I have a customer truck doing thesame thing. He has already replaced the Cp pump ag the dealer and it got better but still a long crank. I scanned it and it takes along te to build rail pressure. Injector balance rate is also good. I think that it still may be the injectors leaking back. Going...
  9. 24vchevy

    New Canadian member

    Also welcome fellow canuk!
  10. 24vchevy

    Duramax Monotherm Pistons

    Hey Guy, are these released to the public yet? Thanks Malcolm
  11. 24vchevy

    I have seen the impossible!

    I know EFI was used to tune it. I was wondering if anyone is willing to share the tune. Thanks Malcolm
  12. 24vchevy

    I have seen the impossible!

    Who's got the software to have the lb7 ECM control the lly injectors and make it run right?
  13. 24vchevy

    LB7: 1000 RWHP #2 Only single Turbo?????

    Great jobm very impressive for a single turbo and no spray. Malcolm
  14. 24vchevy

    LBZ: Cylinder heads

    Thanks Tony appreciate the feed back. Malcolm
  15. 24vchevy

    LBZ: Cylinder heads

    I was wanting to know if all cylinder heads are the same internally for porting? I know that the injector hole is different but wanted to know for portin if the intake and exhaust passages are all the same through out the years lly to lmm Thanks Malcolm
  16. 24vchevy

    Holes In The Crank?

    Reviving a old thread, how did this work out?
  17. 24vchevy

    Come out of your Igloo and be counted!!

    Vancouver island for me.
  18. 24vchevy

    BD Truckin' Nationals - Mission Raceway Mission, BC June 4th and 5th

    Hey I made the poster! I bet Rob will be there with Maxed out.. Malcolm
  19. 24vchevy

    Broken Crankshaft Count?

    So what is the best answer to prevent broken cranks? Internal balance a stocker with cryo? Custom billet cranks? Malcolm
Top Bottom