LB7: 1000 RWHP #2 Only single Turbo?????

[GeneralTJI]

Thanks! About 3800 rpm, nothing excessive.

Right on... sounded good too

 

[24vchevy]

Great jobm very impressive for a single turbo and no spray.

Malcolm

 

[super diesel]

Way to go Danny G. What size intake are you running, and what RPM do you get to before it gets to 10psi and starts to spool?

 

[Dan@PPE]

5" intake, it will build 10psi at about 22-2300. Thanks:hug:

 

[Gasuout]

not to shabby for a slow ass truck :thumb:

http://www.youtube.com/user/WiKD1THeoNe

 

[03badmaxxx]

Not bad dan!!

 

[bevi]

Very cool!! makes me wana go spend money haha

 

[Dan@PPE]

Looks like I will get some dyno time here in the next few days. Hoping to BEST the 1000 RWHP mark! I will keep your guys posted!

 

[Bonestock]

Cool Vids Dan! Looks like the truck is running strong!:thumb:

 

[CurtisEmery]

What size injectors? I ran the same charger with 60 overs last season. Never dynoed the set up though. How much boost if you dont mind sharing? Mine made about 52psi going down the track.

 

[Dan@PPE]

What size injectors? I ran the same charger with 60 overs last season. Never dynoed the set up though. How much boost if you dont mind sharing? Mine made about 52psi going down the track.

Special design 100% over (actual flow). Boost is 55-57 PSI, ref from large part of intake bridge.

 

[CurtisEmery]

Special design 100% over (actual flow). Boost is 55-57 PSI, ref from large part of intake bridge.

1.28a/r?

 

[Dan@PPE]

No.... what rpm were you spinning your too?

 

[CurtisEmery]

No.... what rpm were you spinning your too?

I would see about 4200-4500rpm depending on the track. Love those gtx"s!!!!

 

[Dan@PPE]

I only spin mine to 3700-3800 (peak power) with the housing I'm runnnig.

Ya ME too!!!

What are you running now?

 

[CurtisEmery]

I only spin mine to 3700-3800 (peak power) with the housing I'm runnnig.

Ya ME too!!!

What are you running now?

I would have liked to have tried a 1.44 but never had the chance. The 1.28 was an animal up top!!!! So I can just imagine how much better the 1.44 be up top. I think you would find quite a bit of power in the larger a/r's.

I am building a front mount 4718 for this coming season...

 

[Dan@PPE]

you using the new GTX4718?

This is street truck so the very large a/r would not work so well...

 

[CurtisEmery]

you using the new GTX4718?

This is street truck so the very large a/r would not work so well...

gt4718r the gtx wasnt availible at the time. We will see how this thing works out this year. If it spools good I might look into a gtx50 or 55 for next season.
True. My gtx45 would spool around 2200rpm with the 1.28a/r once I had 1000 degrees egt.