Search results

Search the forum Search Articles
  1. J

    Electric booster pump Instead of trans build

    Throw a hook in the water and I knew i would get a bite. So add in a transgo jr is your suggestion? Is there any thing else you can think of?
  2. J

    Electric booster pump Instead of trans build

    Just as the title states: I am considering using a electric gerator pump and regulator that intakes from the 1/8" npt bung on a aftermarket deep pan and feeds the line pressure test port of the allison. Nothing fancy just a dump off back to pan for the regulator bleed. Otherwise the trans will...
  3. J

    Cylinder wall honing surface finish & ring gap

    Yep Thats what I always thought as well :thumb:
  4. J

    New garret gtx4088 - sema

    There are also drag racing classes that allow the vehicle to weigh less if they have a cast wheel. I think that incenuates billet has an advantage. I have to agree with jdub in my experience a billet wheel does not always outperform cast. The gtx wheels are taller and potrude further into the...
  5. J

    CP Carrillo Pistons

    CP Pistons bought carillo rods and la crankshafts in 2008 iirc. It probably just takes time to get the company organized.
  6. J

    2wd is tuff

    Anyone ever tried a pinion brake to avoid pushing through the brakes?
  7. J

    Twins

    Maybe use an s363 as the high pressure instead.
  8. J

    LB7: 1.10 vs 1.32 for S366 twins

    I have an s480 race cover brand new sitting around. If you decide to use the 1.10 turbine housing: I would go with an s463 with an ett wheel versus the s366. Or if you are going to tow really heavy maybe do the s363 with the smaller 68mm turbine. I believe the biggest force driving the 1.10...
  9. J

    Cranks

    When the cranks are twist forged at the factory. Where are the cranks grabbed and pulled on to twist them and which area's would cool the quickest? I have no idea if the are annealed afterward to get an equal hardness, or if it is possible this area could just be an area that gets brittle. If...
  10. J

    Question: Good Duramax shop in NoVA/MD?

    As far as I know, you are about 2 hours away from any of the aftermarket shops. Have you considered the dealership?
  11. J

    Question: Good Duramax shop in NoVA/MD?

    Are you close to leesburg, or colonial beach?
  12. J

    New Owner in MI

    Good looking ride Welcome
  13. J

    What's up from Indiana

    Welcome and good luck with the 01 build.
  14. J

    New Guy in NC

    Welcome
  15. J

    FNG from NY

    Welcome
  16. J

    Hello from PA

    Welcome from Maryland!
  17. J

    s4xx turbo rubs firewall.

    Is it possible to wedge a board in between the hosing and cowl and then kinda rock the motor by power braking it. sometimes that will give you the extra clearance you need.
  18. J

    Got close to the four digit mark today

    Good job and nice build! Looks like you picked out the right injector size. x2 on the lowering the power and not ripping the guts out of the drivetrain. You are a wise man:thumb:
  19. J

    **CHALLENGE** - TURBO LAG TEST using a log

    I was a little bit skeptical on the triple compression technology at first. Installed one as a high pressure and it surprised me. This truck should be very impressive.
  20. J

    What AR should i buy

    The armalite ar-10 are really nice. The olympic arms lowers are good on a budget.
Top Bottom