Search results

Search the forum Search Articles
  1. T

    LB7: oil is black in one day is this bad?

    I run royal purple and it stays fairly purple for a long time, I would be willing to test out the fact that the detergents work better in another oil, what oil do you guys run that turns black quickly?
  2. T

    My fuel tank is NOT 26 gallons

    I think it's a draw issue, I had a similar issue then my lift pump stopped workin and now I can run it right to the bottom, might install a sump
  3. T

    I got pump rubbed

    Oil contamination will be an issue and I think the case is magnesium
  4. T

    Blow off

    I think I will just buy the electronic, thanks guys
  5. T

    Blow off

    I feel like the drive pressure would be super simple, ya the turbo smart one is nice I forgot about them
  6. T

    Blow off

    I just got my 366 installed and am thinking about putting a blow off valve on to protect from compressor surge, do you think it's worth it to buy the bd one with the controller or just hook it up via drive pressure?
  7. T

    LB7: IHI Port/Polish

    I will keep u posted on towing, I got the htt install kit I think it's just the standard, I wish I would have gotten a gated pedestal for twins down the road but I didn't realize how much of a bugger they are to change.
  8. T

    quick dsp question

    I have a simpler and not to mention smarter solution, read your switch from right to left, problem solved. there is no point in re arranging the tunes, one major down fall is that the ecm will revert to the hottest tune if it lost connection to the switch. to accomplish this however your base...
  9. T

    LB7: IHI Port/Polish

    I did buy the turbo from trent, great price, I havent towed anything yet but just driving around town and on the freeway seems to spool just as fast as stock, bottom end almost seems better and seems to pull hard, when I can get traction in the new snow. I cant wait to tow with it to see what...
  10. T

    Need some help

    In my experience a straight pipe has way less in cab drone than anything with a muffler
  11. T

    My primer only gets hard for a minute?

    filter head is leaking or draining back. or fuel line has a leak some where.
  12. T

    Is It hard to Rebuld A allison

    if your going to do it your self buy the atsg manual get a good trans jack take your time and double check everything I figure I could do it in like 8 hrs or so but that is having already done one, I would say it will take you a weekend if you go slow. Mine went in first time no problems...
  13. T

    a few questions

    would these work for my exhaust vs the u bolt style clamps they send with them? also for my new boost sensor for my edge can I just tap anywhere into the y bridge? like right beside the map sensor?
  14. T

    a few questions

    I extended the wire it wouldnt fit even going under so I extended and put under. I think I got everything moving the right direction now.
  15. T

    a few questions

    any one have any pointers on installing the new down pipe the way the flanges are sitting right now looks like I am going to have to dent the new down pipe, it is hitting the up pipes. causing a gap in the v bands and I cant get the clamp on them
  16. T

    a few questions

    Thanks^^^
  17. T

    a few questions

    ^^ you are right about that I had another guy doing that while I was under the truck.
  18. T

    a few questions

    I was just installing my 366 from trent and was wondering a few things where does this plug go? it was not plugged into anything and it runs in the same loom as my alternator what is this bracket? it is at the back of the motor on passenger side above the up pipe? I had it off to get...
  19. T

    LB7: IHI Port/Polish

    I would stop now and put a 366 on there is no way I would go through all that work to end up with a very slightly improved turbo, I just finished changing mine
  20. T

    Fuel Cooler

    mine is totally blocked by titan tank, could prob use a fan
Top Bottom