Search results

Search the forum Search Articles
  1. J

    LLY: Low rpm tuning efi live

    Okay I'll try making some maf scale adjustments
  2. J

    LLY: Low rpm tuning efi live

    I think I'm being misunderstood so I'll try again. Each dsp tune (1-4) has 10 modified tables it and the truck takes the rest of the info from the base tune.(at least thats how it was explained to me) Well on each of my dsp tunes the all of the modified tables are using maps that come from BARO...
  3. J

    LLY: Low rpm tuning efi live

    Rob modified the tables and put only baro C tables in my dsp tunes except for Torque limited injection quantity tables those use the baro A
  4. J

    LLY: Low rpm tuning efi live

    Okay, I think I've had it backwards, I thought BARO A was the map my truck uses for my atmosphere but after looking at the BARO table I think I'm using BARO C. If so then my modified Base torque tables are correct and my modified Torque limited injection quantity tables that are running off BARO...
  5. J

    LLY: Low rpm tuning efi live

    It's a Donaldson filter clamped onto a 6" long piece of 4" aluminum pipe connected to a 4" silicone 90 then a 12" piece of tubing with the maf about 5" away from the first elbow rotated 10 degrees clockwise off center, (yes it's facing the correct way) and then another 4" silicone 90 into the...
  6. J

    LLY: Low rpm tuning efi live

    It's a homemade 4" intake and custom scoop box, the maf sensor is in the location. I would be looking there but it did the same thing with the lly intake and maf table.
  7. J

    LLY: Low rpm tuning efi live

    Also b1106 is unaltered, Thanks again
  8. J

    LLY: Low rpm tuning efi live

    These are the kind of responses I'm looking for, thanks guys. I just checked the B0727 table and it doesnt look altered. At the first break point its 200 the goes up by 200 every point. I'm 600 feet above sea level at 60 degrees F so shouldn't that mean im dealing only with TQ table B0742? I...
  9. J

    LLY: Low rpm tuning efi live

    I emailed him a while back, sent him my tune and he said nothing was wrong with it, I thought that it may have been my maf table that I had adjusted myself (I switched it to lbz table after putting on a new intake) but he said it was fine. I originally thought I needed to add more fueling at low...
  10. J

    LLY: Low rpm tuning efi live

    My truck is a zf6 manual and has tunes by Idaho rob, I don't have much power or torque below 1300-1400 rpm, for everyday unloaded driving its fine but when you add a trailer to the equation just after releasing the clutch I'm at around 900 rpm, I can put the pedal to the floor and the truck...
  11. J

    ZF Short throw

    Thanks I made it myself, now if I could just find some time to finish the scoop and paint it. I like that shifer a lot better than the old one
  12. J

    ZF Short throw

    Haha I didn't even see the videos till now so the throw distances have already been posted.
  13. J

    ZF Short throw

    I went to look at what kspen has got made up, although I didn't see it, I did get in the truck and go through all the gears. The gates have a much better feel (more firm but still smooth) even with the rubber isolator in the stock shifter. Compared to my truck his had almost no "slop" other...
  14. J

    Question: Question for ZF-6 guys

    If its air, its a self bleeding system, you only have to pump it a couple thousand times to get the air out. :thumb:
  15. J

    Question: Question for ZF-6 guys

    If your are removing the flywheel you have to go get new bolts as they are torque to yield and stretch when you put them in.
  16. J

    Question: Question for ZF-6 guys

    I used an atv jack with a wheel on it but it was on my lift so I just let it rest on the wheel and raised the truck. The pita was the transfer case so I just strapped it up over the cross member. Make life easier and pick up a transfer case gasket when you get the new bolts (if you're doing the...
  17. J

    ZF Short throw

    I just like homemade shifters and since I love motorcycles so much I wanted my favorite grips in there, then I saw the clutch lever and went to town haha.
  18. J

    ZF Short throw

    If you're ever around dfw id be happy to let you have a go at it, no one I've let try can do it very smooth, it takes some getting used to.:driving2:
  19. J

    ZF Short throw

    A better question is, why dont I need a hand throttle? haha But in all seriousness the original intent was to help control the sensitive pedal when taking off after I installed the super jumpy dual disc, after I made it I realized that no amount of throttle control would help the jump, all it...
  20. J

    ZF Short throw

    I feel like I stole the thread, any news on the short throws yet?
Top Bottom