Search results

Search the forum Search Articles
  1. Trevor79

    Service Tire Pressure Monitoring System

    $175? I got four sensors for $100 with new valve stems. To program new it's just like after you rotate tires.
  2. Trevor79

    LBZ: Daytime driving lights

    I had disabled my DRL then wired the bulb to work with my running lights-blinkers on my '01 and '03.
  3. Trevor79

    Need Feed back about the BANKS products

    I had banks. I just wanted a bit more power on demand, and everything protected. I had the ecominder with speed brake and IQ. It worked good for towing and just driving around. I did have problems with their plugs they used. They had bad connections at times. At first I was getting codes left...
  4. Trevor79

    Removal Of Moulding

    I did my '01 red truck after it was a year old, the glue was a pain in the @ss. My '09 was done 2 hours after I bought it new. Used a heat gun and everything came off easy, also easy clean up. You will see how much the red faded, but just hit it with a buffer like said before. My red truck...
  5. Trevor79

    Powerstroke question

    The bed will fit as long as its a single rear wheel and the wheel base is the same, or it had a bed factory. If it was a C&C you need to measure wheel base. As for changing from stick to auto, I'm not touching that cause it's a sin. Auto to stick is the way. I will tell you some years Furd use...
  6. Trevor79

    Gauges (stock) getting bright

    Ok to start with, yes I was sober. Every time I hit a bump it seemed like my stock cluster was getting bright. I got a 09 and run it as dim as it will go. I've been driving a rental 2012 Silverado and before that my beater 99 s-10 blazer. Just hopped in my LMM today and it seems every time I...
  7. Trevor79

    LML 2012 4x4 issue/question

    I dismiss any noises or vibration at that speed.
  8. Trevor79

    LML 2012 4x4 issue/question

    On wet grass, any slick you could here a clunk. Problem with the electronic shift transfer case is that it waits for movement of the drive line till it engages. When there is moving gears it engages easier. with the toqure of the duramax it will spin the wheels when slick and that causes...
  9. Trevor79

    2010 CCSB LMM cleaned up

    I like the no emblem look. I took all mine off the day I bought it. Also took off the body side molding, cleans it up some.
  10. Trevor79

    new from wi, 1995 F350 LB7/ALLY

    Built ford tough...........with GM parts.
  11. Trevor79

    quick FF question for a friend

    Might want to check the wires on the bottom of the filter. It sounds like it is resetting but something is kicking it back off.
  12. Trevor79

    My RockCrawler

    I just need to plump, wire, and do some small things. Just got new Pitbull rockers for it. I'm getting back on it next week, other things in life took over for a bit. I have pics of my old one on my computer. If you have anything you want to know about the stock setups just let me know. I'm...
  13. Trevor79

    My RockCrawler

    That reminds me of my old crawler. I started with a k5 blazer. Then it got cut up, and was going to put a 6bt in it. So I started from scratch for the new one. New one is full tube chassis, four link front and rear, d60, 14b, vw 1.9 td, toy trans with dual cases.
  14. Trevor79

    LLY: LLY Banks exhaust brake issue.

    I had some issues with mine. I had to unplug all the connections and pull all the pins out with needle noses, then plug everything back in. It stopped giving codes. Every now and then it didn't seem like it would turn on though. Also had a shift indicator problem but that was moister in the...
  15. Trevor79

    New from PA

    Here is the truck
  16. Trevor79

    High mpg street truck

    I had a tdi Jetta. Only got 50-53mpg. Lol. I get 17 on highway. The larger tires helped. Need to remove the emission crap next.
  17. Trevor79

    New from PA

    I'll get pics of her up soon as I get back from Maine, wash it and re-alien the bumper. Trying to push over a small dwelling rotated it back some.
  18. Trevor79

    Smoking head/tail lights

    DA sander (dual action) like for body work. When you put 300 grit on it, will smooth out the lens, then just clear it if you want it like stock, or respray it if you just want it lighter. I sanded my ZR2 lights before I sprayed and it came out better.
  19. Trevor79

    New from PA

    NE near scranton
  20. Trevor79

    Smoking head/tail lights

    I can get picks up if you want, but I use the VTH spray. I used it on the D-max and held up great for the past 4 years. I first tried it on my black tdi Jetta I had. When it drys it is darker, cops did not like it! So with the truck I sprayed light and let dry, came out perfect. Nice dark smoke...
Top Bottom