Well I guess it's time

hondarider552

hondarider552

Getting faster
May 28, 2008
10,627
2
36
34
Arizona
:happy2: Mikes in the morning. Yes, im doing the :dancenana:


644332_10151537118671617_233871562_n_zps018f2437.jpg
 
hondarider552

hondarider552

Getting faster
May 28, 2008
10,627
2
36
34
Arizona
Trans was out, cleaned, built and back in the truck by 3pm I'm always amazed how fast mikes guys can complete an Allison.. Back on the trailer and headed back to Phoenix.:happy2: surviving on NOS energy drinks and Oreos :D
 
JoshH

JoshH

Daggum farm truck
Staff member
Vendor/Sponsor
Feb 14, 2007
13,716
779
113
Texas!!!
I'd be driving that beast back to AZ and giving the trailer a break, but congrats on getting it finished up!
 
hondarider552

hondarider552

Getting faster
May 28, 2008
10,627
2
36
34
Arizona
Discovered my output shaft seal from the t-case to driveshaft is leaking pretty good, I assume pull driveline, remove seal and install new one? Any tricks of installing?
 
Bonestock

Bonestock

Active member
Aug 9, 2010
1,358
1
38
Worland Wy
Replace tail shaft bushing & possibly slip yoke. They get worn over time. Sometimes a guy will get away with just a seal & others its the bushing in tcase output. Have you drained the oil in the tcase recently? If its silver & flaky you know the deal! Good luck I hope it's only the seal. Retail for around $50.00
 
DBUSHLB7

DBUSHLB7

Team DMAX
Mar 9, 2012
2,789
0
0
Albuquerque, NM
Bonestock said:
Replace tail shaft bushing & possibly slip yoke. They get worn over time. Sometimes a guy will get away with just a seal & others its the bushing in tcase output. Have you drained the oil in the tcase recently? If its silver & flaky you know the deal! Good luck I hope it's only the seal. Retail for around $50.00
Click to expand...

Brian, I bet $ he is right about this. I've replace my output seal 3 times still drips. I was also told by Chevyburnout1 (who worked on my truck in person) that its likely the slip yoke.
 
WVRigrat05

WVRigrat05

Wound for sound
Jan 1, 2011
3,081
4
38
36
French Creek, West Virginia
DBUSHLB7 said:
Brian, I bet $ he is right about this. I've replace my output seal 3 times still drips. I was also told by Chevyburnout1 (who worked on my truck in person) that its likely the slip yoke.
Click to expand...

Mine leaked for a while and when I trashed my driveshaft I put a new shaft and yoke in it quit leaking for another yr. So I just started running syn. 90w. When it started leaking again
 
hondarider552

hondarider552

Getting faster
May 28, 2008
10,627
2
36
34
Arizona
Huge thanks to James for his help today, installed the new gearbox, centerlink, sleeves, pitman and idler arms in a few hours, took it out for a spin and she launches straight as an arrow. Needs an alignment :D


Ran to the auto parts store and bought a new tailshaft seal although mike already sent me one. Removed the old seal, installed the new one and only got a few drips so far, I only have about 20 miles it, but for now, it's not dripping. Ill make sure to watch it though :thumb:


Goes in Tuesday for an alignment, then turn the wick up for Friday night. :woott:
 
You must log in or register to reply here.
Top Bottom