I saw the
face :thumb:Though my black trailer is white and granite blue truck is grey
truck towing pictures...
- Thread starter malibu795
- Start date
I saw the
face :thumb:Though my black trailer is white and granite blue truck is grey
Have 10 of my 12 straps out.. burnt a 3" and a 2" Monday
29' double beam 12t with catwalk heading to Everett mass
For Monday am delivery
29' double beam 12t with catwalk heading to Everett mass
For Monday am delivery
Last edited:
That's what 3-4k over its rating including the trailer ? How was the handling and gruntingHave 10 of my 12 straps out.. burnt a 3" and a 2" Monday
29' double beam 12t with catwalk heading to Everett mass
For Monday am delivery
Are those base plate frames for equipment at a power plant?
How are you liking those upgraded axles over the 7k you took off? You went 8k correct?
I've got a 20ft trailer I'm looking at putting different axles on it being the brakes on it have never been used in 15 years so I don't know if I'll be able to save them, haha. Plus they're only 5200lb axles and I know they've seen 7-8k lbs. Was just curious how you were liking them.
Yellowchevy
How are you liking those upgraded axles over the 7k you took off? You went 8k correct?
I've got a 20ft trailer I'm looking at putting different axles on it being the brakes on it have never been used in 15 years so I don't know if I'll be able to save them, haha. Plus they're only 5200lb axles and I know they've seen 7-8k lbs. Was just curious how you were liking them.
Yellowchevy
Yes base plates for equipment in an ethonal plant.
8k came from the factory.. Kaufman has a bastard 8k. In short is a 8k tube bearings with a 7k brake.. I currently have lippert 8k with all std off the shelf parts. The closes lipperter dealer sell the whole axle with Springs mounted for 600.00 with 27" eye/slipper springs.. Fwiw avg cost for backing plate, bearings, hub/drum for a 7 is ~300.00 per hub or 600.00 and axle.. Dexter is ~1100.00 ready to bolt in.
Outside grease hubs (repacking every ~10,000 miles or 5 weeks) I have no problems.
Redneck makes an acron/conical but for 5/8-11 studs. They can be had with 9/16 studs
8k came from the factory.. Kaufman has a bastard 8k. In short is a 8k tube bearings with a 7k brake.. I currently have lippert 8k with all std off the shelf parts. The closes lipperter dealer sell the whole axle with Springs mounted for 600.00 with 27" eye/slipper springs.. Fwiw avg cost for backing plate, bearings, hub/drum for a 7 is ~300.00 per hub or 600.00 and axle.. Dexter is ~1100.00 ready to bolt in.
Outside grease hubs (repacking every ~10,000 miles or 5 weeks) I have no problems.
Redneck makes an acron/conical but for 5/8-11 studs. They can be had with 9/16 studs
Next time I'll have to get a shot of my setup all hitched up, but here's a decent shot of my 2002 and my 2015 Crossroads Longhorn 39' 5er on a recent trip.
Loving the "Texas" themed camper, and love my OBS DMax! Thanks guys.
