Racing the 05’

Subman

Subman

Old Geezer
Jun 27, 2008
3,233
10
38
80
Madras, OR, Pahrump NV
Burn Down said:
Verlon said it is a Precision ML... Hopefully the lock up box will work well enough to pick up s few tenths:D
Click to expand...

Same TC I have in my 07, been in there for a long time. Didn't realize you bought Verlon's old truck. Does it still have the 44 gauges along them top edge of the windshield and the hidden compartment in the back seat where he kept his travel arsenal of 100 automatic weapons and 4000 rounds of ammo.:D:D
 
Burn Down

Burn Down

Hotrodder
Sep 14, 2008
7,092
28
48
Boise Idaho
PureHybrid said:
I Por patched my mount back together and bolted it. No point in buying a new one just to modify it!

By your 1/8mi time you should be into the 11's easy. Should've done a "track fix" for the MAF and just maxed that bish out
Click to expand...
I would have but Rob and I updated my V2 and my my dumb ass forgot to update my efi on the laptop... they wouldn’t play with each other :rofl:

Subman said:
Same TC I have in my 07, been in there for a long time. Didn't realize you bought Verlon's old truck. Does it still have the 44 gauges along them top edge of the windshield and the hidden compartment in the back seat where he kept his travel arsenal of 100 automatic weapons and 4000 rounds of ammo.:D:D
Click to expand...
It has 3 gauges and CTS monitor now, to much going on for me. My ocd was pinging driving it back from Shoshone :D I put regular seats in the back as well.
 
six5creed

six5creed

Member
Jan 6, 2016
1,046
58
48
N.C.
epic_haters_gonna_hate_memes_640_04.jpg
 
Burn Down

Burn Down

Hotrodder
Sep 14, 2008
7,092
28
48
Boise Idaho
Pulled my BT lock box out of the 04 and tried it on the 05. Box turned on, armed and disarmed no problem... Hopped in it a few hours later to go to the movies with the wife and test lock up. Shift range inhibited as soon as I put it in gear, FML:rolleyes: Apparently the 5-speed box and the 6-speed conversion don’t jive. Got home at 11:00pm and went to work with a flashlight. Unhooked the wiring at the tcm. I needed the truck to go to work the next morning.

Pulled the box today as I was getting tps errors and brake errors, hopefully they we’re angering the transmission as it had been shifting funky ever since the box.

Also cleaned up some shit wiring on the electric fans I bought used. Controller is gunny bagged so it’s getting a relay and switch Saturday morning before racing.

Bumped lift pump pressure up from 5 psi to 12-13.

Might throw my Mike L super shifter 9,000 springs in the valve body if I’m not to lazy as well.
 
Burn Down

Burn Down

Hotrodder
Sep 14, 2008
7,092
28
48
Boise Idaho
lutzjk913 said:
Any major plans for it?
Click to expand...

Short bed, 4 link, gtx4202r single, maxed outs old lb7 injectors, fleece 750 pump, tow flows & lml manifold. That’s what we have laying around currently. I don’t think we even know what size injectors are:rofl: zf will stay for now until I’m ready to piss Jessey off and put an Alli in it:D

Basically whatever my friend Travis and I have laying around. This truck will be a fun but semi cheap build.
 
lutzjk913

lutzjk913

Well-known member
May 5, 2010
1,681
168
63
groveport, ohio
Burn Down said:
Short bed, 4 link, gtx4202r single, maxed outs old lb7 injectors, fleece 750 pump, tow flows & lml manifold. That’s what we have laying around currently. I don’t think we even know what size injectors are:rofl: zf will stay for now until I’m ready to piss Jessey off and put an Alli in it:D

Basically whatever my friend Travis and I have laying around. This truck will be a fun but semi cheap build.
Click to expand...

Sounds like a blast
 
You must log in or register to reply here.
Top Bottom