clean it well
ripmf666 Active member Sep 20, 2006 15,123 14 38 47 Wentzville Mo Apr 17, 2009 #5,742 make sure to lube it up
ripmf666 Active member Sep 20, 2006 15,123 14 38 47 Wentzville Mo Apr 17, 2009 #5,744 also have the cam gear in place
ripmf666 Active member Sep 20, 2006 15,123 14 38 47 Wentzville Mo Apr 17, 2009 #5,745 make sure you use a new bolt
ripmf666 Active member Sep 20, 2006 15,123 14 38 47 Wentzville Mo Apr 17, 2009 #5,746 you will need to tq the cam plate will have to move the gear around some.
ripmf666 Active member Sep 20, 2006 15,123 14 38 47 Wentzville Mo Apr 17, 2009 #5,747 you will need a wood dowl
ripmf666 Active member Sep 20, 2006 15,123 14 38 47 Wentzville Mo Apr 17, 2009 #5,748 and block the crank from turning over
ripmf666 Active member Sep 20, 2006 15,123 14 38 47 Wentzville Mo Apr 17, 2009 #5,749 and tq the new cam gear on of top of head I thini 173 to 175lb area
ripmf666 Active member Sep 20, 2006 15,123 14 38 47 Wentzville Mo Apr 17, 2009 #5,750 after you have this done you should have something that looks like this.
ripmf666 Active member Sep 20, 2006 15,123 14 38 47 Wentzville Mo Apr 17, 2009 #5,751 oil pump and before the pickup tube install the piston cooling jets. Last edited: Apr 17, 2009
ripmf666 Active member Sep 20, 2006 15,123 14 38 47 Wentzville Mo Apr 17, 2009 #5,755 ok install cp3 and front cover and the water pump
ripmf666 Active member Sep 20, 2006 15,123 14 38 47 Wentzville Mo Apr 17, 2009 #5,757 Last edited: Apr 17, 2009
ripmf666 Active member Sep 20, 2006 15,123 14 38 47 Wentzville Mo Apr 17, 2009 #5,758 next onto the install of the lifters and lock plates
ripmf666 Active member Sep 20, 2006 15,123 14 38 47 Wentzville Mo Apr 17, 2009 #5,759 make sure there nice and clean
ripmf666 Active member Sep 20, 2006 15,123 14 38 47 Wentzville Mo Apr 17, 2009 #5,760 then lube them up and stick them in
