"OFFICIAL" What did you do to your D-Max today?

[KRODMAX/KS]

just delete all those unnecessary lines completely and run your feed line from airdog straight to the cp3

the fuel feed comes from the driver side at the back of the head, it crosses over the motor twice, terrible design. i deleted every hard line on my truck and ran the airdog hose from pump to cp3. you should see the cp3 inlet, its laughable

Thanks Sean, guess I need to take a closer look.

 

[KRODMAX/KS]

^ This. Just get rid of it all. Less connections less chances of a leak too.


Sent from my iPhone using Tapatalk

I appreciate the reply man

 

[c5fourj]

Installed a l5p oil cooler. Omfg that thing was brutal to do. I would rather do the up pipes 10 times over.

 

[Josh154]

420s last week, drop shackles yesterday and a wash today!

 

[Whitetail Addict]

Josh, your truck looks good. What's the offset on those wheels?

The drop shackles have been the best thing I've done to my LML.

 

[Josh154]

Thanks! I’ve been very happy with this truck and how it’s turning out. They are 20x9 +0. 305/50 420s. Front end is dropped all the way with John c shackles in the rear

 

[wilrob]

added more power steering fluid and leak stop, brake pedal was starting to jump power steering cooler is doing its job though

 

[Whitetail Addict]

Thanks! I’ve been very happy with this truck and how it’s turning out. They are 20x9 +0. 305/50 420s. Front end is dropped all the way with John c shackles in the rear

I would've guessed +12 offset on those wheels. I need to get wheels for my LML that's why I asked the offset. I need to drop the bars on mine as well.

 

[Josh154]

I would've guessed +12 offset on those wheels. I need to get wheels for my LML that's why I asked the offset. I need to drop the bars on mine as well.

Man I really don’t know. They came on the truck when I bought it! I just looked on there site and seen they offer it in both 0 and +18. I’d have to agree they are probably +18. My lmm had 20x9 +0 and seemed like they stuck out more

 

[M.A.M.]

Little outside of my comfort zone, but hey, only one way to get out of the box. I stripped all the unused wires and plugs out of the engine harness, and started rewrapping it.

Sent from my iPhone using Tapatalk

 

[ironmax]

Debating whether I fix one injector or 8. Deciding if the blown up pipe bellow will get fixed any time soon. I was really hoping to drive this thing another 110k miles and make it to 500k, but that ship might be sailing. Deffinitaly gotta get this injector handled though. It's getting bad quicker than usual. I checked the oil level and it's not making any, and no smell of diesel either.

Sent from my SM-J337A using Tapatalk

 

[Josh154]

Doin work today

 

[Chevy1925]

Pulled my brothers upper oil pan for a re-seal. His lift made life easier being the diff didn’t have to come out. Also replaced internal trans harness (leaking out the plug), new internal/external filters on trans, oil change (obviously), new rear main, and tie rod. Broke my dads lift and new shop in well . Had it all done in about 12 hours between yesterday and today. I’m good with that

Nice and clean now

 

[wilrob]

Picked up a boost leak somewhere, blowing way more smoke at mild acceleration. Cleans up pretty well if I gun it. Hopefully I just blew a boot...


Sent from my iPhone using Tapatalk

 

[cdbright]

Picked up a boost leak somewhere, blowing way more smoke at mild acceleration. Cleans up pretty well if I gun it. Hopefully I just blew a boot...


Sent from my iPhone using Tapatalk

noticed mine doing the same thing this weekend, still build boost though

 

[wilrob]

Well officially duped for now. No codes. Checked boots, y-bridge, cleaned MAF and air filter. I look like an A-Hole when I have to accelerate... I cleaned everything off with degreaser, hopefully I can see soot somewhere tomorrow...


Sent from my iPhone using Tapatalk

 

[kiwilml]

Well if you have a boost leak there won't be soot ya know? And if you have a drive leak it would seem like you'd hear that pretty easy while driving, I dunno.

 

[wilrob]

Well if you have a boost leak there won't be soot ya know? And if you have a drive leak it would seem like you'd hear that pretty easy while driving, I dunno.

Yeah.. we will call that a blonde moment

I have almost total hearing loss in the high decibel range, so I'll have to borrow a set of ears for that part. I have a buddy with a CTS and a working MAF sensor coming to town this weekend. Ill use those to narrow it down... hopefully

Still building boost, but it still dumped smoke when I unplugged the MAF

 

[cdbright]

Brought home 1 ton of rocks for the yard, sure made the truck ride smooth :thumb::thumb:

 

[TheBac]

Drove it. Picked up our tables from mom's, and delivered a table and antique dresser to my sister. Plan is to deliver other furniture to my brothers house tomorrow if he doesn't take it today. House is completely cleaned out. Garage will be empty next weekend (also by roni and i)....taking the rest to goodwill with BBT. Then it's on to selling the house.