Hey, I got a 04.5 rclb I'm not new to pulling, have 20 plus hooks on my dodge but was just wondering if I could go over my setup on my duramax and see if I got it right in your opinions!
The front end is dropped and I have tie rods sleeved, with a super diesel straight centerlink,
Going to fill my 100 gallon transfer fuel tank and throw another 8 suitcase weights on all for weight
I'm runnin 285 75 16 bfg at's on 16x10 eagle alloys
Receiver is slid in 13" and braced up, and bumper came off and sled stops went in place, got a 26" hitch that is barely coming past bed
No traction bars yet :-/
Rear u joint scattershield
And blocks with 1-1/2" travel. (blocks are illegal in this class)
Now my big question is about spring clamps? I had a big leaf pack on my dodge and didn't worry... I have read clamp just the back and have read clamp both... The pull is in 2 days and I'm starting to get nervous!
Oh and since I'm new to the automatic I'm guessing 4 low, 3rd on gear selector, o/d off , and tow haul on?
I'll post a video after the pull!
It's a 2.4 workstock class by the way
---
I am here: http://maps.google.com/maps?ll=38.811008,-92.849510
Sent from my iPhone using Tapatalk
The front end is dropped and I have tie rods sleeved, with a super diesel straight centerlink,
Going to fill my 100 gallon transfer fuel tank and throw another 8 suitcase weights on all for weight
I'm runnin 285 75 16 bfg at's on 16x10 eagle alloys
Receiver is slid in 13" and braced up, and bumper came off and sled stops went in place, got a 26" hitch that is barely coming past bed
No traction bars yet :-/
Rear u joint scattershield
And blocks with 1-1/2" travel. (blocks are illegal in this class)
Now my big question is about spring clamps? I had a big leaf pack on my dodge and didn't worry... I have read clamp just the back and have read clamp both... The pull is in 2 days and I'm starting to get nervous!
Oh and since I'm new to the automatic I'm guessing 4 low, 3rd on gear selector, o/d off , and tow haul on?
I'll post a video after the pull!
It's a 2.4 workstock class by the way
---
I am here: http://maps.google.com/maps?ll=38.811008,-92.849510
Sent from my iPhone using Tapatalk