LML Twins and Opinions

ZeroGravity58

Well-known member
Mar 23, 2008
1,401
51
48
38
Maryland
I wonder why you have to run two separate feed lines? The older MPI twin kit I have used the galley to feed both turbos and you never heard of turbo failures. Seems like overkill to me?
 

ZeroGravity58

Well-known member
Mar 23, 2008
1,401
51
48
38
Maryland
Cause you starve the cam unless it's a lml block.

I understand the factory setup from the galley. But you don't hear of turbo failures. What I was getting at is I feed both turbos with the oil feed from the pass side of the block. Why do you need twin feeds from both sides of the block? Seem like overkill.
 

Ne-max

I like turtles
Nov 15, 2011
3,361
64
48
Lincoln, Ne
I understand the factory setup from the galley. But you don't hear of turbo failures. What I was getting at is I feed both turbos with the oil feed from the pass side of the block. Why do you need twin feeds from both sides of the block? Seem like overkill.

Depends on the turbos being used. A s400 requires a 6an feed line. Stock and s300s use a 4an. I have seen turbos fail cause of oil.
 

Dm23

Active member
Mar 8, 2019
397
115
43
Socal
Do any of you guys have a step by step way to flash the ecm. I get a e86a code a 050c code and 0536 code.
 

M.A.M.

Member
Jan 9, 2016
429
7
18
Ohio
The 0536 seems to indicate that the tune wasn’t saved to allow remote flashing. Your tuner will need to adjust that if that’s the case.


Sent from my iPhone using Tapatalk
 

Dm23

Active member
Mar 8, 2019
397
115
43
Socal
By the way sorry Op for jacking this thread.

The only thing I could’ve done wrong is get rid of some extra letters or numbers that came up on the efi live website when I had to convert the numbered/lettered lines.
 

Dm23

Active member
Mar 8, 2019
397
115
43
Socal
I’ll try. I don’t really know how to post pictures. And I dont have anything fancy as in my turbo is factory color just like stock.
 

Dm23

Active member
Mar 8, 2019
397
115
43
Socal
Not a good picture. But I can take more tomorrow up close and send them to you
 

Attachments

  • 3062EFDD-9B91-42C0-8783-9E3DB3E8051A.jpg
    3062EFDD-9B91-42C0-8783-9E3DB3E8051A.jpg
    66.1 KB · Views: 60

FROGMAN524

Member
Jul 17, 2010
613
4
18
Well good news maybe, found a local shop that I had never heard about that is quoting me to install the turbo and hot side pipe. Waiting on a call back right now with price.


Sent from my iPhone using Tapatalk