Fast trucks

whitetrash21

put on da damn helmet day
Apr 29, 2008
4,929
0
36
Vegas
Whats it take to put 9500 lbs into the 14's. Cant get under that elusive 15 at this weight..... :D

Needs a diet..... BAD!
 

S Phinney

Active member
Aug 15, 2008
4,008
18
28
Quncy, Fl
What do all of think a crew cab short bed with 8 inches of lift and 35's will be able to do on a II 66 and dual fuelers?
 

othrgrl

Diesel Addiction Owner
Mar 10, 2008
2,151
4
38
Wilmington NC
www.mydieseladdiction.com
What do all of think a crew cab short bed with 8 inches of lift and 35's will be able to do on a II 66 and dual fuelers?

I think it will be able to break some driveline parts - that's for sure. Put smaller tires on it, get the CVs as straight as possible and if you are using any blocks in the rear get some traction bars. If you can't get the CVs close to straight then don't run it in 4WD. After all of that you should be in the 12s but I really don't know where in the 12s.
 

DmaxHawk

Ranch with my Salad
Oct 28, 2008
699
0
16
the 575
Went 13.8 before the Dual CP3, fass and water/meth (with just tranny and tune). Cant wait to see what I get at the trac:Dk on the 28th.
 

dmaxvaz

wannabe puller
Nov 22, 2006
1,132
0
0
46
METRO DETROIT
I COULD ONLY MUSTER A 14.1 WITH THE MOONSHINE TUNE, lifted AND 35s in 4wd the 60 ft was 2.xx. a yr and a half ago. the truck was all over the track for the first 150ft or more- i mean i lifted a front tire and made dotted lines on the track and thought i was maybe going to hit the wall; i had to let off the throttle and then get back into it again. anyways i took the lift off, i went to smaller tires, and put a straight centerlink in a couple months ago. couldnt be happier; also this was with the stock turbo and no twins. we shall see what the truck will do this spring.:D