Thank you. The truck was starting to look like a 90s gasser frame all rusty looking. (Not quite as bad) It was getting depressing to look at. Plus I bought a new house back in July with a garage. Now that I can keep the truck in the garage over winter. There isn't a better time to do something about the rust starting to form.
It took two days corbin. I removed the bed the week before and did the frame this past weekend.
I used a yard sprayer with diesel let it sit then pressure washed it off. Then I did the same thing but with oven cleaner. A pressure washer takes off quite a bit. If you don't have a pressure washer you need to try to source one.
If this is the stuff I saw it brushes on, and it evens out then hardens like an epoxy. The stuff I'm thinking of you can take a hammer to it and it doesn't phase the stuff. Our local ppg industrial coatings shop has it. It's like 60 dollars for a gallon.
This is what i used to paint my frame,its a bit pricey but a year later still looking good
Yep that sounds like it,the brand is KBC,i did mine over a year ago and still looks good
