Duramaxzak 2.6 pulling truck build

[duramaxzak]

Using that for a weight bar? Lol

It is definetly heavy! Lol

 

[05_LLY]

No need to ditch Allison......

 

[duramaxzak]

No need to ditch Allison......

You running a 2wd tail housing with a short driveshaft to the drop box?

 

[sweetdiesel]

You running a 2wd tail housing with a short driveshaft to the drop box?

Same as Caleb mentioned, No reason to ditch the Allison , you can run a simple coupler. Numerous companies make them including SCS.

You can change the gearing in less than 30 minutes.

 

[duramaxzak]

Got it stripped down to the bare housing!

 

[Rancelot211]

What's that out of zak?

 

[duramaxzak]

What's that out of zak?

Late 70's Peterbuilt.

 

[kjp800]

It a 20145? What hubs are you going to go with?

 

[duramaxzak]

It a 20145? What hubs are you going to go with?

SQHD, not sure on the hubs yet.

 

[whitey]

What's new in Zak land? U stretching that frame yet?

 

[duramaxzak]

What's new in Zak land? U stretching that frame yet?

Not much, trucks sitting in the corner untouched!

 

[whitey]

Same thing here. Especially with the holidays and stuff. But need to get back on on it, the boys are after me!

 

[lawnboy01]

It a 20145? What hubs are you going to go with?

JEB are making some nice hubs now

 

[duramaxzak]

JEB are making some nice hubs now

I will have to check them out! I have been looking at Keck's stuff.

 

[quadracer37]

I will have to check them out! I have been looking at Keck's stuff.

Kory has good stuff!

we have used the SCS dually hubs on the past couple 20-145 Builds and they work really! accepts a wide 5 pattern inner Real wheel and an 8 lug outer wheel.

 

[kjp800]

I went with a set of kecks. Very nice pieces and he was very nice to work with.

Mike, not to hijack the thread, but aren't you running one of jeb 3.0sb chargers? I'm in the market for one for next year and slowly starting to do some research on them.

 

[duramaxzak]

I went with a set of kecks. Very nice pieces and he was very nice to work with.

Mike, not to hijack the thread, but aren't you running one of jeb 3.0sb chargers? I'm in the market for one for next year and slowly starting to do some research on them.

Are those on stock spindles or F106 spindles?

I actually sold the stock SQHD housing and am thinking about going with a sheet metal SQHD housing.

 

[kjp800]

Stock 20145 spindles, I took 6" out of the long side and am running 2 short side axles. Nice simple setup and compared to some setups not that expensive

 

[lawnboy01]

I went with a set of kecks. Very nice pieces and he was very nice to work with.

Mike, not to hijack the thread, but aren't you running one of jeb 3.0sb chargers? I'm in the market for one for next year and slowly starting to do some research on them.

Yes. Been trying some of them. Hx60 and The Garrett version. Also playing with different housings. I can't say enough goods things about Eric. Definitely one of those stand up guys.

 

[lawnboy01]

Zak, are going to sheet medal a housing or use factor housing?