DIY CP3 parts

[duramaxsandwich]

i am also interested in a bracket, controller, and pulley

 

[racinmike77]

volker?

 

[TrentNell]

bump

 

[White Duramax]

I would buy dual cp3 parts also if he still has some or can get some.

 

[mde]

Curtis and I discussed it yesterday and we try to put some new parts together ...

 

[bullfrogjohnson]

Let us know.... I am very interested

 

[TrentNell]

Let us know.... I am very interested

x2 lease:

 

[durallymax]

Curtis and I discussed it yesterday and we try to put some new parts together ...

cool let us know when its ready to go. I am interested in running twin pumps with the new motor if I can do them cheap enough.

 

[duramaxsandwich]

thanks volker.

any of you guys with lb7's i found the ats directions for the twin cp3 kit install. it gives some pretty good pictures and ideas of lines and parts. basically where everything goes...

http://www.atsdiesel.com/ats_new/pd...-701-900-INST 01 GM LB7 Twin CP2 Kit v1.5.pdf

 

[turk walker]

I tried running the belt the ats way,but with the way volkers bracket mounts(like PPE), you can't find a belt long enough.
The one I tried using(would need to look up the number) was an 8 rib that I cut down to a 6 rib.It was so tight that it took 2 people and a pry bar.

I called dan at ppe and he helped me out with the parts to run the belt their way.

 

[kenny]

Any forward progress on the parts guys? Very interested in procuring this DIY kit from you. Thanks

 

[White Duramax]

Curtis and I discussed it yesterday and we try to put some new parts together ...

Any news?

 

[Fastorange]

yes, I too would like some parts

 

[juddski88]

i neeeeeeeddddddd some parts :hug: where are you volker? i might have to resort to actually picking up the phone

 

[juddski88]

well i just tried calling and got voicemail, so we'll see, hopefully i get a return call

 

[black 5]

Very interested. PM me when you have some in stock please.

Josh

 

[05lly2500hd]

very interested.

 

[sweetdiesel]

I'm Bi-curious as well

that is a little off topic Paul:angel:

tube has a 59.5 -1 deg conus and works perfect.

hope it helps ...

Yes that helps so much thankyou.

Also just wondering if you would be into making some custom HP fuel lines? Since you seem to have the tools

 

[mde]

Also just wondering if you would be into making some custom HP fuel lines? Since you seem to have the tools

No, I don't have the tools anymore, as I sold my test bench this tools went with the bench. Sorry

 

[Spurs_442]

where do you purchase your connectors for your controllers? I have put everything together for a dual fueler kit for myself except for the hard line and connectors for my controller. Any help you could give me would be great.

thank you