Danville Performance 72MM VVT

smkndmax05

"Smoked Out"
Feb 17, 2011
479
0
0
Indiana
Just left the dyno after installing the first Danville Performance 72MM billet VVT!!! Mark Broviak definetly knows how to build a turbo! My dyno numbers don't give the turbo justice considering I'm stock bottomend and only 45 over injectors single pumped. I made 634hp with no tuning adjustments. I make more power quicker and stubstain it longer on the big end!! Should make the 11.90 class for sure. I can't want to run at the track!!
 

paint94979

Beer Nazi
Sep 18, 2006
11,715
8
38
37
You will bend your rods with that much torque... Tell your tuner to detorque your tune
 

TheBac

Why do I keep doing this?
Staff member
Apr 19, 2008
15,614
1,869
113
Mid Michigan
You will bend your rods with that much torque... Tell your tuner to detorque your tune

Bet they already are, he just doesnt know it yet. ;)

Curious if the starting 615/1080 was done on the same setup just minus the new turbo? Same dyno?
Would be interesting to see this charger tested on an engine built to fulfill its potential. Test before and after turbo install.
 

TheBac

Why do I keep doing this?
Staff member
Apr 19, 2008
15,614
1,869
113
Mid Michigan
My rods are fine by the way!!

Sure they are....keep telling yourself that....1200tq, no matter how you made it, is a recipe for trouble on a stock bottom. Thats fine if you want to throw caution to the wind, but Ive been there, done that. Just trying to warn you.
 
Last edited:

Burn Down

Hotrodder
Sep 14, 2008
7,092
28
48
Boise Idaho
What the F is with all the negativity lately? I think he is well aware of the dangers, he has been on here awhile... Can't someone be excited about there truck without someone calling them a liar? Lighten up!