Broke another piston...
- Thread starter Alligator
- Start date
This is a tech forum...Stop your $hit or I will divert your BS to Mike L....
:angel:
Quit running twin CP3's Chad.:rofl: Probably was a field rat that got hungry.:baby::joker:
Mike, you know 2CP3's don't crack pistons, they bend rods;especially aluminum ones...
LOL Chad, I was like oh shit!
anyway, looks like you need a heat spacer in there. Head is too close to cyl. gets hot high comp.
we used to remove the heat shields fro more power and shave the cooling head. That is what happens when you go to far. Was the a copper flat washer thing between there? if not you need one. Maybe a little thicker. What % nitro are you running? 20% maybe step down to 15%
anyway, looks like you need a heat spacer in there. Head is too close to cyl. gets hot high comp.
we used to remove the heat shields fro more power and shave the cooling head. That is what happens when you go to far. Was the a copper flat washer thing between there? if not you need one. Maybe a little thicker. What % nitro are you running? 20% maybe step down to 15%
Am I on your shit list now Patron?
Yes, I mean no....
Team Arrogance is flying it's colors...
I'm anti-dickhead right now...
Yeah, there was a copper washer there when I took the head off. The motor is spec'd to run 33%, so that's what we've been running. I will be getting a new motor next week for it, the factory has a $120 replacement policy for a new motor w/o a cooling head, if I don't decide to get a bigger motor for it.
Mike, you know 2CP3's don't crack pistons, they bend rods;especially aluminum ones...
Chad
Do you know what you did to all of us with this stupid post?
You did, didn't you? All your friends saw this and said Holy Shit and jumped to read your post.
May the fleas of a thousand camels nest in your croutch dude.:angel::rofl:
Chad
Do you know what you did to all of us with this stupid post?
You did, didn't you? All your friends saw this and said Holy Shit and jumped to read your post.
May the fleas of a thousand camels nest in your croutch dude.:angel::rofl:
:rofl::spit::rofl:
Chad
Do you know what you did to all of us with this stupid post?
You did, didn't you? All your friends saw this and said Holy Shit and jumped to read your post.
May the fleas of a thousand camels nest in your croutch dude.:angel::rofl:
Thanks Mike:spit::hug:
I have a Revo with a RB Concepts TM323 in it. Thing flies! But honestly, Brushless and Lipo is where its at.
yeah, I looked at that swap. Looks very fast, and less weight too. It just the battery charging that I hate. It's too easy to fill up a tank with Nitro.
Shyoot, just get one of the new revo mini's. I believe they already come with a Castle Creations Mamba Brushless and Lipo. As far as just filling up, remember, with an electric, there is no tuning. Plus just buy a few batteries and keep them charging one after the other. My buddy is heavy into the electrics. One of his batteries lasts him 30 minutes or more of hard driving.
Quit running twin CP3's Chad.
I thought he was running the triple CP3 Kit from his site w/the oval pulleys and crossdrilled lines.