Brake upgrades

[WisconsinHick1]

I have one that has about 1,000 miles on it I'll sell. 2011 hydrobooster that was on my 2001 drag truck.

 

[dordtrecht5]

I have one that has about 1,000 miles on it I'll sell. 2011 hydrobooster that was on my 2001 drag truck.

PM sent

Sent from my SM-N910V using Tapatalk

 

[moparkxracer]

Is there a benefit in the booster over a 07 lmm one?

 

[gmduramax]

Is there a benefit in the booster over a 07 lmm one?

I noticed an improvement with the LML booster.

 

[moparkxracer]

Was it a bolt in replacement over the stock one? Any chance you'd have a part number to what you used, thank you.

I noticed an improvement with the LML booster.

 

[moparkxracer]

Bringing this back up, what master cylinder are you guys using for the lml booster swap?

 

[KyleC4]

I believe when I asked gmduramax this he said he just used the master cylinder that the truck originally came with.

 

[gmduramax]

Bringing this back up, what master cylinder are you guys using for the lml booster swap?

I believe when I asked gmduramax this he said he just used the master cylinder that the truck originally came with.

Yea the master that came with the truck bolts right up. I'm trying to get a 2011 master to fit but I need to get an adapter for the lines.

 

[moparkxracer]

I ordered one for the lml but not sure what is needed to bolt it up. I'm working on an lmm.

 

[gmduramax]

I ordered one for the lml but not sure what is needed to bolt it up. I'm working on an lmm.

It'll bolt up but the thread for the lines is larger. I'm trying to find out what size the fittings are.

 

[Awenta]

https://www.stillen.com/brakes/brak...r/vehicle/2004-chevrolet-silverado2500hd.html

I'll throw this up here if someone wants a big brake kit without running 20 wheels.


Sent from my iPhone using Tapatalk

 

[Awenta]

Also anyone use ceika brakes ever? They will make a kit pretty much any size. Thought it was neat. But still no cheaper options than wilwood that I've seen.

https://ceika-store.com/search?q=Chevrolet+Silverado+2500+HD


Sent from my iPhone using Tapatalk

 

[gmduramax]

I'm not sure if those calipers are as large as the willwood. Doesn't willwood make a kit with a 13 inch rotor?

 

[bigmackmiller]

Subd


Sent from my iPhone using Tapatalk

 

[WVRigrat05]

Found a really good, cheap brake mod, pull 1,000 lbs out of the bed. Truck will do shit on the tow tune it didn't like to do on tune 4 too.

 

[gmduramax]

Found a really good, cheap brake mod, pull 1,000 lbs out of the bed. Truck will do shit on the tow tune it didn't like to do on tune 4 too.

Weight makes a huge difference

 

[Harbin_22]

Heavy wheels and tires make a huge difference too.

 

[Wikid]

Ive just done the PowerStop Brake kit on my rear axle still need to install the front kit. They seem to bite a little better. Would like to add stainless break lines and the LML booster but I hate bleeding breaks. Never seem to get the air out.

Im not worried about the rotors cracking as I dont tow or do any super heavy braking. Just wanted a higher quality pad and rotor that would stop on a dime in case of idiots.

 

[1SloLMM]

I bought Russell's braided lines I see it replaces the soft lines just in the 4 corners, has anyone has a braided line made for the soft line from the frame to the center of the rear axle that splits to each side?

 

[moparkxracer]

Yes,

I bought Russell's braided lines I see it replaces the soft lines just in the 4 corners, has anyone has a braided line made for the soft line from the frame to the center of the rear axle that splits to each side?