Almost done!!

[68skylark455]

Looks good.
What turbo are you going to run?
What are you going to do with the truck?

The 4202R kit goes back on it. I installed it some months back for my customer and then we had blown headgaskets. Not from the turbo, it had been losing coolant for a while just couldnt find it.
Tech note-when you triple the boost you can find any water leak pretty fast

He uses it as a daily driver and a weekend racer. He jsut wants to beat a certain dodge truck from his hoem town. I think he may now be able to do it

 

[68skylark455]

are you going to let me test drive this truck when its done :devil:

Your the co-pilot for the first set up-what more could you ask for:rofl:

 

[LarryJewell]

The 4202R kit goes back on it. I installed it some months back for my customer and then we had blown headgaskets. Not from the turbo, it had been losing coolant for a while just couldnt find it.
Tech note-when you triple the boost you can find any water leak pretty fast

He uses it as a daily driver and a weekend racer. He jsut wants to beat a certain dodge truck from his hoem town. I think he may now be able to do it

what numbers is he trying to beat

 

[LarryJewell]

Your the co-pilot for the first set up-what more could you ask for:rofl:

I knew I could count on you :hug:

 

[68skylark455]

what numbers is he trying to beat

8.9 in the 1/8th

 

[LarryJewell]

8.9 in the 1/8th

you could have done that with his old setup and EFI

 

[RodZZilla]

you could have done that with his old setup and EFI

Anything worth doing is worth overdoing. This way he can toy w/the goat.

 

[68skylark455]

Getting closer!!!!!!!!

 

[LBZ]

Looks Good.

What size is that intake on the Y-bridge? Who made it?

 

[68skylark455]

Its 3" and I did-well-I came up with the size and piece and had a friend weld it-need one?

 

[LarryJewell]

Its 3" and I did-well-I came up with the size and piece and had a friend weld it-need one?

Can you come up with a similar setup for a LLY, if so, I know several that could be sold, I can give you the LLY Riser part for a mock up too

 

[68skylark455]

Bring it by-I don't charge for the info-I will give you diminsions and what you need-it was very easy-the hard part was having to beat up the first one after I had it powder coated-should have test fitted it first oh well-thats research and development at its finest:rofl:

 

[LarryJewell]

It will be later today, waiting on my truck, I dont want you to see me driving a Cobalt

 

[LBZ]

It will be later today, waiting on my truck, I dont want you to see me driving a Cobalt

Poor Larry:rofl:

I was just curious about the piece cause it looked really nice. Sweetdiesel had a 3" one built for his LB7 race truck as well but it was a straight piece with a 45* hose on it-it didn't have the fancy elbow.

 

[68skylark455]

Anybody know the torque specs for the flywheel cover to block and oil pan on this 04 LB7?

 

[slowlmm]

fly wheel houseing is 60 ft lbs. fly wheel houseing to upper oil pan bolts 37 ftlbs acording to alldata this is for my truck and lbz but i would think yours would be the same

 

[ripmf666]

Tommy is right but to help you more here's the link to the GM Specs shows what all you need to do.
http://www.duramaxdiesels.com/forum/showthread.php?t=8698
http://www.duramaxdiesels.com/forum/showthread.php?t=8697

 

[Jared Duramax]

Look in the GM specs section to see if you can find it i looked real quick but couldnt find anything but i may have over looked it.

The motor is looking real good i cant wait to see it run

 

[Jared Duramax]

oops i must have overlooked it and am a little slow:rofl:

 

[ripmf666]

oops i must have overlooked it and am a little slow:rofl:

It was on page 4 or 5 but I went and added a better view for him other then just numbers.