2006 LBZ Bump when stopping and taking off

A

apease236

New member
Jan 19, 2016
11
0
0
I am new to this forum, I have 2006 LBZ it is completely stock. When I come to a stop once I have driven the truck about 50 miles roughly I get a bump when stopping or taking off. I have read to grease the slip yoke splines so I had that done last weekend. I also read a TSB that the ECT can cause the same issue so I replaced that with still no change. Any Ideas where to go?

I have also heard that the vss can cause this due to the fact that it feels like a late brake release in the rear. Help please!
 
A

apease236

New member
Jan 19, 2016
11
0
0
2 piece that was all inspected and checked during the slip yoke greasing. It only happens once the trans and engine are at operating temperature.
 
whitetrash21

whitetrash21

put on da damn helmet day
Apr 29, 2008
4,929
0
36
Vegas
Any worn parts can cause what you're describing. Carrier bearing worn out, worn/broke pinion bearing, bad u joints, worn out bushings, etc. As to why it only happens after trucks warmed up/driven a few miles, I don't know. Unless it's something in the trans/t case, I can't see mileage or vehicle temp having any effect on suspension components.

Might need to drive it till it begins making noise, then get it on a lift right away and see if it repeats.
 
A

apease236

New member
Jan 19, 2016
11
0
0
I am beginning to think its a low pressure situation in the trans pump or a bad torque converter. We will see. I took it in the shop this morning. Sad part is I jist bought the truck from a reputable lot here locally. So its on their nickel. I told them I do not want the truck back tell its fixed.
 
J

jlawles2

Well-known member
Jan 28, 2010
1,060
40
48
Danbury, TX
I read that there is a "special" grease for the slip yolk. Might look into the grease you used. Mine did it for a while after I replaced the carrier and greased the yolk. I think the grease was too thick and could not "flow" fast enough to not thud when the drive shaft needed to compress.
 
c20elephant

c20elephant

C20ELEPHANT
Apr 25, 2013
2,065
0
0
Phoenix, Arizona
apease236 said:
I am new to this forum, I have 2006 LBZ it is completely stock. When I come to a stop once I have driven the truck about 50 miles roughly I get a bump when stopping or taking off. I have read to grease the slip yoke splines so I had that done last weekend. I also read a TSB that the ECT can cause the same issue so I replaced that with still no change. Any Ideas where to go?

I have also heard that the vss can cause this due to the fact that it feels like a late brake release in the rear. Help please!
Click to expand...

Does your truck have a carrier bearing.?



ACDelco Nickel grease or a nickel plated slip yoke.


http://www.gm-trucks.com/forums/topic/133346-brought-it-in-for-slip-yoke-clunk/


https://www.google.com/search?num=1...ved=0ahUKEwjes_zhwb3KAhUklYMKHU2OA5AQ7xYIGigA
=
=
https://www.google.com/search?num=1....0....0...1c.1.64.serp..0.12.1187.D4x16BEmQ5k
=
=
 
Last edited:
A

apease236

New member
Jan 19, 2016
11
0
0
jlawles2 said:
I read that there is a "special" grease for the slip yolk. Might look into the grease you used. Mine did it for a while after I replaced the carrier and greased the yolk. I think the grease was too thick and could not "flow" fast enough to not thud when the drive shaft needed to compress.
Click to expand...

I already had the yoke greased who is a tech for GM. He used the special grease.
 
You must log in or register to reply here.
Top Bottom