14" Rotors with stock calipers

[Harbin_22]

No one would notice if one was missing

 

[duratothemax]

any updates on this Anthony? Will 17" wheels clear the calipers with these relocation brackets?

 

[gmduramax]

any updates on this Anthony? Will 17" wheels clear the calipers with these relocation brackets?

I have to send the rotors back. But I think it'll be a tight fit with 18's.

 

[ripmf666]

Front

Rear

 

[redneck191218]

gmduramax once you get the right rotor and spacer would you mind posting or PM me the SSBC P/N I think a lot of people are interested. I'm about to do a full brake job 130,000 miles on the stockers.

 

[cwylie]

Looks like its
SKU: A126-67

 

[gmduramax]

Rotors are 23179AA2L and 23179AA2R. The brackets in the kit are both # A24482-8

 

[gmduramax]

Caliper relocating brackets? This is going to sound stupid, but how do those work?

ON EDIT: I figured it out. Anthony, can you measure the distance between the bolt holes (that mount to the spindle) and the bottom edge of the brackets?

9 and 9/32's inches from center or holes. Center of hole to bottom is 24/32's inch

 

[gmduramax]

Here's my problem. SSBC's solution, they're sending me spacers to push the bracket out. WTF don't buy this kit from them.

 

[Chevy1925]

wow

 

[Burn Down]

Ya wtf?

 

[gmduramax]

wow

Ya wtf?

Exactly my thoughts. I'm sure I can find the right rotor maybe even from napa. I'll just send these pile of shits back and keep the brackets.

 

[TheBac]

9 and 9/32's inches from center or holes. Center of hole to bottom is 24/32's inch

Ok, I also need one more #....from the spindle mount holes to the caliper mount holes. Sorry, thats probably what I should've asked for initially.

How tall is that rotor and what's the width of the braking surface?
If the rotor is shorter than 3", you arent going to find another close to it. Ive been searching for a shallow-hat rotor like that for a while.

BTW, is the rotor seated down on the hub completely?

 

[malibu795]

too bad you guys cant swap these on...

 

[ripmf666]

I need to find the time to change my rotors and pads. All the darn OT were working I have just enough time now to mow the yard and rest on the weekend.

 

[gmduramax]

Got my spacers. Going to install and test today.

 

[gmduramax]

First drive and it takes less pedal pressure to stop the truck and to activate the ABS. The truck stopped from 60-0mph in 137 feet. 16 more than the stock brakes. I'm going to bed in the pads more to ensure they are working 100% and I'm also going to make sure the pads are moving freely inside the caliper.

 

[gmduramax]

Bedded in the rotors some more and it's down to 116 feet. Going to check the pads tomorrow to make sure they are sliding properly.

 

[RPM Motorsports]

Should have done a before and after, at what RPM they can hold the truck back staging..

 

[gmduramax]

Should have done a before and after, at what RPM they can hold the truck back staging..

I still can on my truck :thumb: