1/8 mile discussion and time slips post here!

Bdsankey

Bdsankey

Vendor
Vendor/Sponsor
Feb 1, 2018
4,152
1,262
113
Larsen, Wisconsin
Chevy1925 said:
This Nate, Luke’s buddy


r.tapatalk.com

First 4x4 Allison in the 5s

Huge kudos to Nate Bandstra. We went out testing last night with both of our trucks. Finally after a year of working his butt off he got his STREET truck into the 5s. No fiber glass street legal. Same truck that went 6.00 at ucc last year. Hopefully next weekend I can follow his leed.
r.tapatalk.com r.tapatalk.com
Click to expand...

Is he a member here?


Sent from my iPhone using Tapatalk
 
coker6365

coker6365

Coker6303's ***** Daddy
Dec 4, 2011
486
16
18
Yall leave the tow rig out of this. That windowed block is just weight reduction, it still starts and runs... just rattles and bangs like Luke's converter bolts.

A new thread and list from scratch gets my vote. Would help folks maintain an interest in making the list rather than being discouraged by ET slips that are unachievable for most even after all these years.

Sent from my SM-G975U1 using Tapatalk
 
  • Haha
Reactions: Chevy1925 and MarkBroviak
Bdsankey

Bdsankey

Vendor
Vendor/Sponsor
Feb 1, 2018
4,152
1,262
113
Larsen, Wisconsin
I know on the Powerstroke side they have the "Elite Powerstroke's" website, is that something we're interested in doing? It's 1/8mi, 1/4mi, and dyno. For some reason they broke out into a 1/4mi fuel only and 1/4mi overall but that seems like semantics at that point.



I have no problem helping run anything, if the minds decide they need some help I'm all game. If the minds decide its a waste of time that's fine as well, just wanted to offer my services.
 
Chevy1925

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
21,667
5,813
113
Phoenix Az
First off, Brad and Richard, thank you for the offer on helping with the list/s. We are going to stick with the current mods we have as they feel it’s a non issue to take care of them.

That said, we will have the two lists on their own forum sections that I’ll create. One will be the 1/4 mile 10.999 and faster capped at 150 trucks. New/faster times will bump the slowest off the list. Adding more 10 sec trucks is redundant and honestly, this is a pretty cool problem to have! Retired trucks will stay, there is a lot of nostalgia on that list that this forum, industry and tech derived from.

1/8 mile list will be 6.499 and faster. 7.999 is way easy to achieve, 6.499 is a faster time than what the 1/4 mile list has (in retrospect) but from what I see, it’s a good number to strive for. Not necessarily easy to get on and little tough for a stock engine to achieve . Right now there is no truck cap (how many on the list) as obviously we gotta see how it grows.

Open to thoughts and opinions.
 
PureHybrid

PureHybrid

Isuzu Shakes IT
Feb 15, 2012
3,492
472
83
Central OH
Ne-max said:
I think he's doing that so Rich "Coker" can be on the list with his race truck.

Nates on here but not active.
Click to expand...

I'm not sure what you're getting at. How would raising the bar to 6.49 from 7.99 help?

Bdsankey said:
7.00 in the 1/8 is approximately a 10.92 in the 1/4.


Sent from my iPhone using Tapatalk
Click to expand...

NHRA uses 1.6 as the conversion factor, does the diesel industry use a different number? I've always used 1.55


If you guys are worried about the list getting too big, why not just have an 1/8mi only list but cap it at 50 trucks and no minimum time? List would be fairly full to start, but wouldn't grow a lot, just get faster as slower trucks get bumped out.
 
Bdsankey

Bdsankey

Vendor
Vendor/Sponsor
Feb 1, 2018
4,152
1,262
113
Larsen, Wisconsin
PureHybrid said:
I'm not sure what you're getting at. How would raising the bar to 6.49 from 7.99 help?



NHRA uses 1.6 as the conversion factor, does the diesel industry use a different number? I've always used 1.55


If you guys are worried about the list getting too big, why not just have an 1/8mi only list but cap it at 50 trucks and no minimum time? List would be fairly full to start, but wouldn't grow a lot, just get faster as slower trucks get bumped out.
Click to expand...

I just did a quick google search on Wallace Racing's 1/8 to 1/4 conversion table so 1.6 may be more accurate. We all know my junk ain't going onto that list until 2021.
 
coker6365

coker6365

Coker6303's ***** Daddy
Dec 4, 2011
486
16
18
PureHybrid said:
I'm not sure what you're getting at. How would raising the bar to 6.49 from 7.99 help?



NHRA uses 1.6 as the conversion factor, does the diesel industry use a different number? I've always used 1.55


If you guys are worried about the list getting too big, why not just have an 1/8mi only list but cap it at 50 trucks and no minimum time? List would be fairly full to start, but wouldn't grow a lot, just get faster as slower trucks get bumped out.
Click to expand...
Luke is saying I am too slow and need the 7.99 to make it.

Sent from my SM-G975U1 using Tapatalk
 
  • Like
Reactions: PureHybrid
D_Ferrante801

D_Ferrante801

I hate everyone.
Apr 2, 2019
66
34
18
Smidge late to chime in but would hope its not a 7.99 list... 7.9 is like a Mid 12 pass.... I could see like a 6.70 or 7.0 ( 7.0 is in the 10.8-10.9 range ). I do like the idea of 1/8th since your now fastest trucks in the nation ( for the most part ) all are limited to 1/8th as Luke said.
 
Last edited:
  • Like
Reactions: Bdsankey and MarkBroviak
coker6365

coker6365

Coker6303's ***** Daddy
Dec 4, 2011
486
16
18
My vote would be 6.70 and down. Thats a mid to high 10 and fitting for the 1/8 classes. Although a 6.50 and down would certainlinly limit the work load to keep the list updated.

Only pickup I have running right now does an 8.70 so it doesnt matter to me anyway. My New Balance kicks might make the list though.

Sent from my SM-G975U1 using Tapatalk
 
  • Like
Reactions: Bdsankey, MarkBroviak and D_Ferrante801
TheBac

TheBac

Why do I keep doing this?
Staff member
Apr 19, 2008
15,610
1,866
113
Mid Michigan
I went back 3 years in the 10.99 list thread and found these:

NGM Diesel Dragster - 4.166 @ 174.16 (6/23/18) - 2500 lbs, Turbo 400 - NGM Diesel
Black Lightning Pro Mod - 5.671 @ 129.19 (6/6/20) - 3445 lbs, LLY, Allison 2wd - Mark Broviak, Evan Drosehn
Tony Burkhard/DHD - 5.851 @ 113.48 (7/29/18) - 5500 lbs, LBZ - Mark Broviak
Nathan Bandstra - 5.875@ 123.86 (8/7/20) - 5950 lbs, LLY, Allison - UDT
J Hyatt - 6.067 @ 120.71 (5/8/18) - 6300 lbs, LB7 - Ridgerunner
Ryan Pini - 6.151 @ 118.94 (8/24/19) - 4360 lbs, LLY - Mark Broviak
Rick Fletes Chevelle - 6.208 @ 113.55 (8/2/20) - 4500 lbs, LB7, TH400/GearVendors - RF Garage
Adam Hull - 6.288 @ 121.49 (7/8/18) - 5500 lbs, LLY, Allison, Mark Broviak
JKlennon - 6.303 @ 112.22 (5/1/19) - 5100 lbs, LBZ - Mark Broviak
Justin Duffy - 6.377 @ 110.52 (5/23/20) - 6450 lbs, LLY - UDT
Ne-max - 6.383 @ 116.16 (5/6/18) - 5950 lbs, LBZ - Mark Broviak
Prostreeter600 - 6.407 @ 108.55 (11/11/16) - 6000 lbs, LBZ - Mark Broviak
DBreschLB7 - 6.444 @ 109.98 (6/20/19) - 5700 bs, LB7 - HTPerf
Mike Maas - 6.527 @ 114.22 (9/9/20) - 6000 lbs, LB7 - Mark Broviak
Diesel Addiction Shop Truck - 6.567 @ 106.28 (10/25/17) - LBZ - Diesel Addiction
 
  • Like
Reactions: CarolinaHD
Osubeaver

Osubeaver

Professional Grade
Aug 30, 2008
696
0
16
Oregon
HI guys, it's been a while! I would think the 6.99/6.50 or so threshold would be pretty good if you're going to make a list. I looked at the 10.99 and quicker list for nostalgia sake, and holy cow are a lot of the fast times are from a long time ago. I agree with you Tom, that's an old list and 1/8 mile is probably more relevant now. In my area diesel drag racing is pretty much dead.

Just for reference my truck was at a high of #13 on the list back in the day. It's #61 now. That's how far this stuff has progressed.
 
You must log in or register to reply here.
Top Bottom