Search results

  1. D

    torque limits

    i know that the tqe limits can be modified but the actual "defuel"when a shift is being done ?
  2. D

    torque limits

    if mike l built the tranny-i wouldnt worry if the torque limiting is turned off the torque tables arent used anyway and i believe that defueling is in the software and cant be shut off
  3. D

    How many miles

    51k on my 07
  4. D

    New A/C compressor!

    remember-gmc did on all there engines(detroit diesels) so if they can do it way back then-mcrat can do it now
  5. D

    Getting a DP, what to coat with???

    ive used hpc-high performance coatings in the past for headers and snomobile exhaaust-seemed to work great although i would stay away from the wrap-i tends to weaken metal somehow over time--ive seen lots of headers rot out underneath the wrap alot quicker than the unwrapped ones
  6. D

    Time to stop??

    i just hit 50k on the odometer-been runnin no less than 30psi 30 degrees and 1400 egts for 49 of those 50 all is well so far...... except those damn trans cooler lines
  7. D

    Bad Vibrations

    how bout an engine missfire?bad cylinder/injector etc
  8. D

    cooler lines leaking again

    anyone have a good fix? its my 3rd set and its just rediculous-same design no change will the older 05 steel lines work?
  9. D

    hey mike is my 1057 borken? video...

    ive noticed the same thing with mine-kinda like its slipping more even though its not-seems to rev higher and theres more of a difference in tow haul mode than before right? maybe its just worn out? i did notice that my trans temps do seem a little higher too
  10. D

    Synthetic Fluid and Tempature

    the same difference as synthetic oil and regular amsoil filters are synthetic lots of othwers are paper and fall apart/clog quickly youll be suprised how soon the filter gets restricted and gets bypassed
  11. D

    Synthetic Fluid and Tempature

    you def should be running an amsoil filter not fram or delco and the myth of mixing dino and synth oil was valid 30 years ago when the 2 woerent compatible but today i dont know of any oils that cause a problem when mixed i think its more of a coincedence and coolant related air/cavitation...
  12. D

    Synthetic Fluid and Tempature

    ive run the amsoil 5/30 since new and have 45k on it now i dont think its the oil causing a problem sounds like a poor flow condition -maybe ck the water pump /serpentine belt for the fan and lower radiator for blockage
  13. D

    Long term storage issues?

    i think starting the engine is not a good idea unless you can load it and get to operating temp to burn off acids best thing is fresh clean oil and filter -pull out batteries and let her set and i agree to empty fuel tank ck coolant condition and temp rating too
  14. D

    Long term storage issues?

    oops -forgot overinflate the tires by about 20psi if you cant unload them also as far as rodents i found that fox/coyote urine stops them pretty good-they sell it in a powder and i make a few "sachets" of them and leave inside engine area and interior-you cant really smell it but the mice do...
  15. D

    Long term storage issues?

    soak everything in silicone-everything!you will use about10 cans of it but it will slow the corrosion down-i use trans fluid underneath but it drip on the ground for a few days and the treehuggers may raise hell-try not to use a wd 40 type as its not good for rubber items i would also coat the...
  16. D

    Valve Adjustment??

    wow there solid lifters-wheres the adjustment/lock nut on the rocker arm? cool learned something again on this site!
  17. D

    Valve Adjustment??

    pretty sure they are hydraulic-no adjustment needed
  18. D

    Ask a McRat!

    shrinkage so why dont sheep shrink when its raining?
  19. D

    Ask a McRat!

    heres a good one- does advancing timing create h/p and kill torque in an otherwise stock lbz lets say i want more h/p and less torque output other than increasing rpm how can i?
  20. D

    new lbz tables-defuel?

    mike- was wondering if you have any insight as to the new efi torque tables for the lbz-are the trannies gonna be falling out with the higher rpm and no torque reduction-ordo ya think they will hold up?