Search results

Search the forum Search Articles
  1. JDPlowboy

    4x4 end play

    It got a new housing when it got built so it was installed on a stand.
  2. JDPlowboy

    4x4 end play

    If there's anyone out there I'd believe over anyone else it would be you. Just wasn't sure how checking the input end play assures that the rear thrust is ok. I don't wanna just replace parts and say it's fixed. was hoping to find a sure sign as to why it failed. Truck was a low on trans oil...
  3. JDPlowboy

    4x4 end play

    When you pull up on the input shaft your just lifting the c1/c2 clutch housing out of the p1 planetary right? Or would you check endplay on input shaft with tailhousing up and be pushing in on Input shaft?
  4. JDPlowboy

    4x4 end play

    This is what I came up with Trans is on a stand with tailhousing up so the planetary gears are resting on the c3 backing plate. Then I backed the spanner nut off so the output shaft can float freely between rear thrust washer and rear housing bearing. Zero'd the mic with the shaft sitting...
  5. JDPlowboy

    4x4 end play

    Since you tighten the output shaft to the rear bearing, I'm guessing one would have to take an H gauge and get measurements from extension housing down to output shaft then measurement from rear of case down to thrust bearing and figure the clearance?
  6. JDPlowboy

    4x4 end play

    Since I can't find a thread on the subject, figured I'd start a new one for future 4x4 housing swap references. Truck recently had a new extension housing installed. A few hundred miles later the truck quits moving on its own. Dis assembled trans and found the rear thrust bearing between output...
  7. JDPlowboy

    74' c-65

    So my father is the typical father figure I'm sure must of us grew up with... (Straight pipe your truck and you're wasting your money on your truck type) So I was totally surprised last week when he came down to the shop with a proposal. His favorite grain truck (first tandem he'd ever bought...
  8. JDPlowboy

    Factory aluminum dually wheels

    I think you're right on the similar look to ford wheels.
  9. JDPlowboy

    EFILive EFI live noob question??

    You can just full flash your efilive tune into it
  10. JDPlowboy

    Factory aluminum dually wheels

    I bought these for $400 they came off a 97 1 ton. My good friend bought this 01 with 14,000 miles on it from a guy who bought it new with every option he could get in 01 and it has the same wheels
  11. JDPlowboy

    New Colorado ordering

    Whoops I meant only 10k LESS than what my dealer quoted me (55k)
  12. JDPlowboy

    New Colorado ordering

    Only 10k more than my dealer quoted me lol
  13. JDPlowboy

    New Colorado ordering

    What was price tag Jason ?
  14. JDPlowboy

    Cruise control

    02 Chevy, ever since I've owned it the cruise control hasn't worked. I'm finally getting around to working on it. First off I tested the switch, switch tests good, I'm getting signal. Then the previous owner had the clutch pedal switch removed and looped the connector, I installed a new CPPS, I...
  15. JDPlowboy

    Tell me the truth about your tuner...

    Dan Clarke at dans diesel performance has done almost 100 trucks for me now. He keeps his cell on his hip at all times and I've never had to leave him a voicemail in last 4 years I've been dealing with him. He's done several deleted lml tunes for me and the customers were very happy. I have...
  16. JDPlowboy

    Factory aluminum dually wheels

    What did the factory aluminum wheels look like on 01-07 trucks look like?
  17. JDPlowboy

    Turbo oiling issues

    https://vimeo.com/149710075 Rebuilt the turbo again for hopefully the last time. She rips!
  18. JDPlowboy

    Turbo oiling issues

    Spun tires at 70mph then scratched cover and let out. Guess I'll get to rebuild it one last time hopefully
  19. JDPlowboy

    Turbo oiling issues

    I've been dying to let this thing rip. Has 265's on stock wheels a built motor, Trans s468 60 overs and 12mm cp3 and I haven't even got to smoke a tire yet lol
  20. JDPlowboy

    Turbo oiling issues

    If video doesn't work. It made an instant 90psi at turbo end of hose. I pulled gauge Off and I now have a 3/8" oil shooting fire hose. I think I have found my solution. Now for a test drive
Top Bottom