Search results
-
-
Off Season Sled Pulling Mods
Congrats Travis :woott: How come you didnt drop the motor in with the charger on?- sweetdiesel
- Post #1,145
- Forum: Sled Pulling
-
-
-
Best Tuners?
For a 75-100 HP tune i would find someone local that has EFI and have them flash in a tune to your ECM for you. It shouldnt cost you more than 200 bucks- sweetdiesel
- Post #2
- Forum: Duramax Tuning, Logging, and Gauges
-
-
-
i dont know what to do here fuel problems
Michael I Its been so long since ive seen the stock lines:) Testing is easy with this fuel block:D- sweetdiesel
- Post #60
- Forum: Duramax Hard Parts
-
-
Question: Oil Filtering requirements
there isnt much left of my relief valve its been trimmed down so much i dont have any other relief valve in the sytem, I think fingers made something like that though. I just run a lighter oil Cen 20-50 made way to much pressure here is the pump i run on the sump...- sweetdiesel
- Post #19
- Forum: Duramax Hard Parts
-
-
New CP3 Setup
What a nice set up! I love all the thing you have done.:cool2: that cp3 is got some lil tricks done to it doesnt it? it appears you have a setup that will max out the cp3..No? fuel lab lift pump now? Are you running thermostats? i think it needs braided hoses for the inj return lines...- sweetdiesel
- Post #17
- Forum: Duramax Hard Parts
-
Question: Oil Filtering requirements
Ive been running his pump for years.- sweetdiesel
- Post #17
- Forum: Duramax Hard Parts
-
Question: Oil Filtering requirements
Tim Its a aux pump on the sump. The truck wont need to be running that way. The system one filter is used for the stock pump and i dont have a oil cooler besides the one hooked to the sump. Clear as mud?- sweetdiesel
- Post #15
- Forum: Duramax Hard Parts
-
i dont know what to do here fuel problems
DS in on the back of the head.......PS is on the front PS you will have to some how tie into the line further down from the head. i dont remember if there is a hose or its all hard line on a stock truck? but its tough to get at the head as it is behind the alt bracket.- sweetdiesel
- Post #56
- Forum: Duramax Hard Parts
-
Question: Oil Filtering requirements
I run a system one remote part number 202-202712 Its only 75 micron up to 25 gpm this is the main filter dash 12 AN in/out Also my lower oil pan is tapped it runs a cat 2 micron filter that goes into a pump then a aux trans cooler with fan......I use this when its in the pits to circulate the...- sweetdiesel
- Post #13
- Forum: Duramax Hard Parts
-
-
Off Season Sled Pulling Mods
I did it to save room.....if you run electric water pumps it handy. :thumb: agree- sweetdiesel
- Post #1,140
- Forum: Sled Pulling
-
Off Season Sled Pulling Mods
Thats so nice!!! No power steering? or is that a hydraulic pump? I love where you mounted the alt- sweetdiesel
- Post #1,138
- Forum: Sled Pulling
-