Search results
-
-
100 PSI Boost into ECM feed.
01 lb7 it's on the intake runner on PS I think the later model lb7 is on the Y bridge- sweetdiesel
- Post #91
- Forum: Duramax Tuning, Logging, and Gauges
-
LB7: Why won't it start!?
If you had efi, we could cut diagnose in half- sweetdiesel
- Post #35
- Forum: LB7
-
LB7: Why won't it start!?
Truck will start with a bad regulator I've done it lots Have you checked for stuck Inj yet?- sweetdiesel
- Post #34
- Forum: LB7
-
-
100 PSI Boost into ECM feed.
depends how high the insight goes..... If it reads a raw value from the ECM then it should- sweetdiesel
- Post #88
- Forum: Duramax Tuning, Logging, and Gauges
-
100 PSI Boost into ECM feed.
You need to atleast on a lb7 rescale boost sensor- sweetdiesel
- Post #87
- Forum: Duramax Tuning, Logging, and Gauges
-
100 PSI Boost into ECM feed.
Iirc it's more rectangle? On a lb7 anyway It's a 3 wire for sure though..... Could you also provide the male end of that sensor so we can just wire it to the harness part That way I could use it for boost . Drive press and lift pump and just obviously log one at a time but it would be nice...- sweetdiesel
- Post #86
- Forum: Duramax Tuning, Logging, and Gauges
-
-
-
high pressure outlets on cp3
Yes ind inj sells a fitting- sweetdiesel
- Post #2
- Forum: Duramax Hard Parts
-
LLY: Oil Pressure reading w/ EFILive
Motor would pretty much have to come out to get the front cover off Gauge would probably cost you 20 bucks just for simple testing I would go into the oil gallery even with a metric barb fitting it shouldn't be more than 30 bucks for the gauge fitting and hose clamps I would opt for a 0-100...- sweetdiesel
- Post #14
- Forum: Duramax Tuning, Logging, and Gauges
-
1/4 mile discussion and time slips post here!
Wow 35 under 11.0 that's awesome ! Any predictions for this time next year as to what it will take to be on the top 50? 10.997 is mine:D- sweetdiesel
- Post #517
- Forum: 1/4 mile 10.999 or quicker Duramax-powered list
-
Engine diagnosis
Good stuff how big of sticks you runnin Eric?- sweetdiesel
- Post #54
- Forum: Duramax Hard Parts
-
How cold are you?
Ouch Albert I don't miss that one bit Sidenote: I bet there is just as much snow on location in Iraq right now:confused: WTF- sweetdiesel
- Post #39
- Forum: Gallery
-
-
question on ficm removal??
You could just slide the hose off the fitting- sweetdiesel
- Post #4
- Forum: Duramax Hard Parts
-
question on ficm removal??
Only need a new one if the old one leaks:D- sweetdiesel
- Post #2
- Forum: Duramax Hard Parts
-
-
Lb7 Fuel & Air to support 650 on a dd
Suncoast 1055 best converter I've ran- sweetdiesel
- Post #30
- Forum: LB7