Those either must be out of date or for special circumstances (I.E. someone installing on an older O.S.). I have no experience/idea with apple (iOS) but EFI works on all versions (obviously within reason) of windows
I’ve done several head unit swaps with no issues. Maybe I should pay attention more but I’ve never even seen that warning. They are on a completely different circuit
Been trying to catch up on some maintenance and minor stuff.
Replaced stepper motors
LED swapped the dash to white LED
Installed a Insight CTS3 with EGT probe
New stereo
New speakers
Detailed the interior
Center console swapped
Tore down and cleaned the cooling stack
Installed new motor and...
I would get some electrical cleaner and make sure the connections are clean. I would also take apart the bail connectors on drivers side valve cover and use electrical cleaner on that. I had a similar issue (though mine was cam position sensor/accelerator pedal) that cleaning the bail connectors...
Yes. After I couldn't get 7.5 to connect, I closed it out and opened V8 just to ensure that I didn't have a cable/interface issue. In all honesty, I'm still more comfortable with 7.5 than I am with 8. I haven't messed around in 8 much since it became somewhat all-inclusive after I sold the race...
I just wanted to start a short thread here since when I was looking on various forums I could never find concrete update on this. Maybe it could help someone out at some point. I was fixing to dig into check the reluctor wheel and start changing sensors.
My 05 LLY started throwing an occasional...
I’m aware of that. Im not trying to buy time necessarily, trans holds power just has occasional weird shifting. It’s an Alligator V with a Precision ML that was built 9 years and almost 200k miles ago. I’m the guy that can’t stop messing with things and never satisfied with how it runs.
What...
No, I’m just having a lot of weird issues with rough downshifts. Especially 2-1. I’ve shuffled around through a bunch of tunes from a variety of tuners as well. The trans was built circa 2011 and is definitely due for a refresh. Just trying to do anything I can to make it as decent as possible...
Hey guys, so I'm trying to reset the TAPs on my LLY. I've done it in the past from the 7.5 scan tool but cant figure out how to do it with V8 for the life of me.
I tried using the 7.5 scan tool but it won't connect to my truck. Obviously I've confirmed the V8 scan tool works
Any insight? I'm...
I don't know this as a absolute fact, but both 04.5 and 05 LLY's were identical from what I've seen (I've owned two LLY's, my buddy and my cousin both have them as well that I do all the work on as well). The 06 LLY was a different beast and essentially a LBZ that was detuned.
I would also...
I was told by Wade Boyd at Diesel Day Dreams that it would be beneficial when I had my old race truck. But I don’t have any data to back that up either :o
I'd run it as-is, obviously with the overloads/bags. I towed 14k with my old race truck on a 72vgt/S483, dual pumps, and 60% overs and it did just find. Little laggy off light but definitely manageable. I'm also at a minimum of 5,000' elevation too.
Honestly I've had the best times buying something from another part of the country and driving it back. Have done it a handful of times and was always a fun, exciting road trip.
I fully intend on buying a GT350 come springtime and find myself specifically looking across the country for a road...
I’ve shipped a couple turbos just in cardboard with expanding foam. Worked well and inexpensive.
But I had a Danville 72vgt single on my old truck with 60% overs for a while and had zero drivability issues. Just a hair laggy at elevation (7k) but definitely manageable with smart driving. Also...
I work down here as a field supervisor. If you make it down this direction definitely give me a shout. Most of the rigs drilling in Northern Colorado are in Weld County.
Agree 100% with everyone. I think this will be my last year messing with my truck. Probably sell this summer. The culture is just crap these days. I went to the ATS Gauntlet event and was incredibly dissapointed (even with low expectations to begin with). I don't blame people for moving on. I...