Search results

Search the forum Search Articles
  1. kidturbo

    Twins with Twins, Anyone?

    Good to know. Like the fittings, that bosch 4mm hose with external braid is not easy to find. I planned to use a better quality hose than what came in the kit, soon as I find find it. Sent from my SAMSUNG-SM-G870A using Tapatalk
  2. kidturbo

    Broken Crankshaft Count?

    Unlike the LB7 injector issue, no one ever stepped up to say we'll cover that issue for everyone... These fall under the early model CP4 category. If it breaks under warranty, no problem. Out of warranty, "We've never seen that problem before. Ya must have gotten some bad fuel..." :spit:
  3. kidturbo

    Twins with Twins, Anyone?

    The SAE medium duty pattern works well for many applications. Sticking with allen head socket screws for all the mounting hardware. Cuts down on the toolkit size.. [emoji2] Sent from my SAMSUNG-SM-G870A using Tapatalk
  4. kidturbo

    Broken Crankshaft Count?

    Chevy, so freaking close I can smell it now.. :thumb: New NB Fluidampr units bolted to the front, and 68lbs of flywheel mass on the back end. Yielding somewhere around my body weight worth of total rotating mass. I'm not a small guy either... But was still kinda nervous about the Callies...
  5. kidturbo

    Broken Crankshaft Count?

    I checked out the stock replacement Callies had at UCC. It's an option, from a better grade of steel vs OEM. They feel confident it's much stronger, but not on same level as the billet 4330 version. Advantage being no modification to rods required. On a side note, I tore down a 150+ mile LMM...
  6. kidturbo

    Twins with Twins, Anyone?

    Not Dtech, but not Bosch either. Whats been the issue? I have a couple used factory sets here, but would prefer some new ends. Anyone have the bosch part # 's ? Sent from my SAMSUNG-SM-G870A using Tapatalk
  7. kidturbo

    Twins with Twins, Anyone?

    Got one bank wired up tonight. Not digging the yellow tee fittings though. Sent from my SAMSUNG-SM-G870A using Tapatalk
  8. kidturbo

    Twins with Twins, Anyone?

    Both ends of version A. :D I was just amazed how tall that the factory tube looks without any accessories mounted up top. I could raise it an inch or two, but mainly wanted to turn it out away from the thermostat housing. The upper housings are going to be low profile with 1 3/4 outlets. One...
  9. kidturbo

    Twins with Twins, Anyone?

    A is no longer an option.. lol Sent from my SAMSUNG-SM-G870A using Tapatalk
  10. kidturbo

    Twins with Twins, Anyone?

    Oil fill tube, A or B ?? Sent from my SAMSUNG-SM-G870A using Tapatalk
  11. kidturbo

    Injector Spray Pattern - LMM

    We can both agree on that much. Mahle claimed those forged pistons failed due to excessive heat, but she it never once touched 1500F. So I'd call BS. However Marc and I had a discussion about this setup right before Dave's last piston failure. With an older tune running 15deg max timing the...
  12. kidturbo

    Injector Spray Pattern - LMM

    He was running just under 60mph tops, and I figured 750-800hp range with that compound setup. However the failures all occurred getting on plane when the prop wasn't hooked up yet. For example, the stroker pistons let go while testing a new prop that wouldn't hook up. It would cavitate bad...
  13. kidturbo

    Injector Spray Pattern - LMM

    Driving at the moment. But it's 27 main table above 3400r if I recall. Sent from my SAMSUNG-SM-G870A using Tapatalk
  14. kidturbo

    Twins with Twins, Anyone?

    Well if ya count his first bone stock engine, ah yeah.... But we must toss a 4th one in there for the broken crank. That 32 Sonic has killed more Duramax engines quicker than any pulling truck I know of. 12k lbs of boat + 6spd Allison + ASD8 drive is obviously a combination to avoid. The...
  15. kidturbo

    Injector Spray Pattern - LMM

    That's what I was really wondering, if the valves faces are causing that specific pattern. These injectors have more hours on a bench than in a engine... While actual flow rate numbers varied between test platforms, everyone agreed patterns looked normal. Pilot pulses are bad, Okay.. :roflmao:
  16. kidturbo

    Injector Spray Pattern - LMM

    Those are from a set of +100 or 120% Exergy sticks and 10mm pump running 1700us max PW at 190MPA. Timing was touching 27deg with all 3 pilots ON. Hence the illusion of a stock injector cranked way up... Engines ran great, with very little smoke. One setup with compounds, another time with...
  17. kidturbo

    Injector Spray Pattern - LMM

    What's everyone's take on this spray pattern? Sent from my SAMSUNG-SM-G870A using Tapatalk
  18. kidturbo

    LBZ: Wyoming 6.6 lbz build

    Don't let these guys scare ya. Did my own tip swaps some years ago on my lly, still running. And just swapped two on my 04 Dodge couple months back. Also ID actually has the real Bosch test bench, not some knock off. Zero issues with any injectors from there in my experience. I just so...
  19. kidturbo

    Twins with Twins, Anyone?

    Got one mocked up in the boat to locate engine mount holes and check clearance for accessories. Now can order main heat exchangers and finish the plumbing. Plenty of room towards the center between engines, but tight on the outsides. So here is where the identical twins looks will need to...
  20. kidturbo

    Twins with Twins, Anyone?

    Lasers are just the coolest invention.. Laid out with a laser, and cut out with a laser. Just add paint... [emoji41] Sent from my SAMSUNG-SM-G870A using Tapatalk
Top Bottom