Search results

  1. prostreeter600

    Is anybody running a single battery if so any one in particular that works well ?

    What group size are our original batteries ?
  2. prostreeter600

    Is anybody running a single battery if so any one in particular that works well ?

    Battery tender is not a bad idea either since my truck is not my DD
  3. prostreeter600

    Is anybody running a single battery if so any one in particular that works well ?

    I'm guessing it would work fine on my 14/1 setup just need to find at least a 1000CCA
  4. prostreeter600

    Is anybody running a single battery if so any one in particular that works well ?

    Wanting to do it for weight savings . Pull the tailgate , 1 battery , center console and passenger seat . Should drop at least 100#
  5. prostreeter600

    Is anybody running a single battery if so any one in particular that works well ?

    Ok. I figured the a high CCA would be key problem is a lot of these parts stores don't carry anything over 800 or so in our normal group size
  6. prostreeter600

    Is anybody running a single battery if so any one in particular that works well ?

    Time for new batteries . I was wanting to just run 1 battery if it is ossicle to do without problems . Any suggestions from those that have been running just 1 with success .
  7. prostreeter600

    Pad and rotor kits

    I put power stop extreme duty kits on mine and really like them . Bought them thru Summit Racing and got 60 Summit Bucks
  8. prostreeter600

    Happy Birthday Josh H

    Happy Birthday Josh . Have a great one .
  9. prostreeter600

    San Antonio Area

    Not sure exactly what's available but there is a lot more country areas near Seguin that will be closer to town there than in San Antonio . Seguin in smaller and no where near as busy . It's more lay back . If you like country you'll Love Seguin
  10. prostreeter600

    Dallas Attack

    I agree . My dad taught us to treat people as individuals, with that said I can tell you there are good and bad in all races . He taught us not to stereotype. I imagine it's hard to be an officer , but if you don't have the temperment to keep calm in dealing with what's involved in being one...
  11. prostreeter600

    Dallas Attack

    I respectfully agree with Malibu795. First off I live in the Dallas Tx area and work here as well day in day out . While I don't condone the violence on the officers I can see and understand how and why it is happening , I firmly believe we have not seen the end of it but instead the beginning...
  12. prostreeter600

    Drag and light street tire/wheel combo.

    Basically a slick with small square blackouts to see how much rubber is left and a thicker sidewall than a slick . Load rating is better than the Nitto NT05Rs .
  13. prostreeter600

    Drag and light street tire/wheel combo.

    You, me and a ton more diesel enthusiasts wish the same . You would think that someone like Mickey Thompson would make a 30-31" tall Drag Radial for 17" or 18" wheels . For now I'm stocked about the Hoosiers. Just have to find time to put the new to me billet trans in along with the new Goerend...
  14. prostreeter600

    Drag and light street tire/wheel combo.

    I just sold my previous setup that was 18 x 9 racelines with some Nitto NT05Rs. Weighed in around 58--60 pounds each . Thing is the tires were only 28.875 tall I believe . I went to another raceline wheel 18 x 9 Assaults that weighed in at 28#s and Hooiser Drag Radials 325/45/18 that weighed in...
  15. prostreeter600

    Top 53 RWYB Street Legal List

    That is impressive for a 2 wheel drive . X 3 on what your suspension setup is and what tires your running to make it hookup. Would Lub to see a video of some runs .
  16. prostreeter600

    What turbo to use in triples

    I leaned on Shane for some advise . Had numerous conversations with Mark Broviak . Mark suggested that I go with the tightest housings on my SXE369s . He was right cause it works awesome . Thanks you Shane and Mark . And as soon as I get my new trans and converter back in I'm calling on you Mark...
  17. prostreeter600

    What turbo to use in triples

    I would do the 72/87. I have a similar setup . Mine isn't even tuned for the triples yet and it comes in extremely quick, pulls super hard and is super easy to drive on the street . My setup is in my Sig
  18. prostreeter600

    3.42s in a Street Truck

    I think so too . It Revs very quick and pulls super hard . My current tunes are for the 6480SF and compounds I had before . I believe my shift points are at 3800 currently .once I get the new converter in it and find out what can stall it to . I'm gonna have Mark tune it for me . It's a pricey...
  19. prostreeter600

    3.42s in a Street Truck

    So Mike, with the 30.2" tall tires (Hoosier DRs) do you think it would be beneficial to go 3.42s . I'm not sure what RPMs my motor will need to shift at with the 9100AF and the rest of my components . Judging by your numbers it sounds like 3.42s will be in order . How much does your truck weigh ?
  20. prostreeter600

    3.42s in a Street Truck

    Pic with the Nittos