Just was see what you guys recommend. Truck will still be a daily driver. What turbo to use? Cast 475/87.90 or 472sxe/87/.90 or 472/83/.90 bmw? With two 366. Thanks. Engine will be built and running 100% or 60% injectors
What turbo to use in triples
- Thread starter Badheartbull
- Start date
I use the 472/83.90 as a single right now. I have purchased a used triple kit with the 475/87/.90 and the two 366
Listen to what Shane said Abt the 87. I think a 72 would be a better turbo for the 66's. I have a 475/87/1.0 (TCT) in the valley on mine. I really like how it drives. The 472 would have prob been a better choice for a street toy. I have 472 78/1.0 stainless turbine as atmospheres, thats why I went with the 475.
Last edited:
I would do the 72/87. I have a similar setup . Mine isn't even tuned for the triples yet and it comes in extremely quick, pulls super hard and is super easy to drive on the street . My setup is in my Sig
^x2. I've drove a few twin setups before and nothing compares to his triple setup. Extremely fun street truck that pulls harder than anything I've ever felt before. Great setup and spools amazing. Even with old tunes it runs awesome.
I leaned on Shane for some advise . Had numerous conversations with Mark Broviak . Mark suggested that I go with the tightest housings on my SXE369s . He was right cause it works awesome . Thanks you Shane and Mark . And as soon as I get my new trans and converter back in I'm calling on you Mark to do my tunes . I think it's only gonna get better.
.9 or 1.0. You really don't notice much if a difference driving. I would go 1.0 turbine. Do you have the system gated?
Sent from my SM-G920V using Tapatalk
How would three of the cheap S475/96/1.32 work for a triple turbo setup? I realize it wouldn't be very streetable. But would it be a decent setup? Would it require gating? It sure would be cheap to build..... Those turbos are very inexpensive.
Sent from my SM-N920V using Tapatalk
Sent from my SM-N920V using Tapatalk