Search results

Search the forum Search Articles
  1. SickLL7Crenshaw

    2nd gear start tcm tune

    Maybe I need more throttle position, maybe instead of just tapping it I should ease into it a little more to engage 2nd smoother? :confused:
  2. SickLL7Crenshaw

    2nd gear start tcm tune

    I got ya Kyle makes sense, I mean as soon as I start with the throttle boom yanks the truck into 2nd very harsh, and then it's fine but the whole banging into that gear is what's scaring me.
  3. SickLL7Crenshaw

    2nd gear start tcm tune

    Yes sir No I haven't, trans just shifts flawless with this 5854os.
  4. SickLL7Crenshaw

    2nd gear start tcm tune

    I messed with a second gear start today for the first time. When the trans was below 150* it shifted into 2nd no problems once I tapped the throttle but once the trans gets a little warmer it would almost slam into 2nd from first when I tapped the throttle. So I went back to my first gear start...
  5. SickLL7Crenshaw

    11.18@123 for Sickll7crenshaw

    Don't waste your time IMO. Have to drive through the water pit and idk, I'd much rather run somewhere else to be honest with you but thank you sir! Haha I can't wait to see the limo run that fast!! :thumb:
  6. SickLL7Crenshaw

    What is your fuel efficient DD?

    3126 in it?
  7. SickLL7Crenshaw

    What is your fuel efficient DD?

    Blue roan, has four legs, about 15 hands tall. Max speed of 35mph.
  8. SickLL7Crenshaw

    Went to the track

    Hell my LB7 in my sig pulls low 1.7s too weighing 7200lbs on 285 Toyo MTs lol 1.61-1.64s is what I usually see on the stock motor in my LLY but after the build I've only made one pass and yes it was a 1.68 but I also did have to drive through the water pit at that track so that sucked. I was...
  9. SickLL7Crenshaw

    Went to the track

    If you wanna run better, lighten up for wheel/tire setup for sure. You throw some stock wheels on with some 28-29" radials and you'll drop your times down to a 12.3-12.4 easily especially with a better 60ft. I know some have done some calculations but I agree with some who came up with every lb...
  10. SickLL7Crenshaw

    11.18@123 for Sickll7crenshaw

    What size of inj did you go with James? Moar fuels! Well when I had the s475 I was running it over the stock LLY charger on the stock motor, 40 overs and cp3k and it ran a [email protected].
  11. SickLL7Crenshaw

    11.18@123 for Sickll7crenshaw

    Tensioner is a Dayco 89259 with a steel pulley.
  12. SickLL7Crenshaw

    11.18@123 for Sickll7crenshaw

    Does anyone have a link or a part number where I can find a Dayco tensioner for this truck? James advised me yesterday to get one and he also had a thread on here when he used to throw belts after the dual fueler was installed on his truck and he finally got the issue fixed and a lot of it was...
  13. SickLL7Crenshaw

    11.18@123 for Sickll7crenshaw

    I thought about selling this truck after I built it, i hardly have anytime here on the ranch anymore, then I ran this pass and I'm hooked again lol Thanks Chris! Ya elevation was 3700ft, where I live is 4600ft, I wanna make a trip to Ennis or Phoenix next spring to see what she's got. Thanks...
  14. SickLL7Crenshaw

    11.18@123 for Sickll7crenshaw

    Haha thanks buddy Thanks James! I only have a 60psi gauge and it holds a little past that, I would say right at 65. Drive is right at 80psi on that tune. I need to get a 100lb boost gauge now. I shimmed my cp3 bracket to pitch the top forward a bit a tad. I used a straight edge and got it as...
  15. SickLL7Crenshaw

    11.18@123 for Sickll7crenshaw

    As very few here know, this last summer I built the motor (big thanks to Henry), went with yellowchevys (Russells turbos rock) modified stock charger, and replaced the s475 with an 80. LDS 100% overs, cp3k and a new stock lbz pump. Refreshed my trans (thanks Evan for the advice you gave me over...
  16. SickLL7Crenshaw

    Any reputable shops near Tulsa??

    Ttt
  17. SickLL7Crenshaw

    Any reputable shops near Tulsa??

    :thumb: I don't need any parts advice or anything, he has a LB7 up pipe on hand he just needs someone to swap it in for him this week. So if anyone in the Tulsa area wants to make a few bucks to swap a passenger uppipe this week let me know and I'll give him your number. Thanks
  18. SickLL7Crenshaw

    Any reputable shops near Tulsa??

    Hey guys have a good friend that is in Tulsa, OK and has a blown up pipe bellow on his LMM and is looking for shop or a guy that could swap in a LB7 up pipe for him this coming week. I'm not fimilar with the area so I figured I'd ask on here, as all the shops he's contacted wanted over $800 and...
  19. SickLL7Crenshaw

    Injector SALE!!!!

    Select year, fuel system, injectors. Sale prices highlighted in red. http://lincolndieselspecialties.com/c-1091058-gm-duramax.html
  20. SickLL7Crenshaw

    Injector SALE!!!!

    Great prices Brent, always a pleasure doin business with you.
Top Bottom