Search results

  1. hondarider552

    New Product!!! GM Duramax Deep oil pan

    Apparently none tow with them because I asked for proof of lower engine oil temps and.... Crickets...
  2. hondarider552

    DJM 5" Lowering Kit - OEM Bump Stops

    The djm is a true 5 inch drop in the back if you do the hanger/shackle combo. Just measure the distance from the axle tube to the bottom of the bump stop. A 5 inch drop in the back on a full leaf pack dmax will sit at the factory bump stop, djm actually says remove the factory one and install...
  3. hondarider552

    Ladies ... all you geezers still on here ?

    I'm just interested in your new boat and the food you make everyday :eek::D
  4. hondarider552

    Ladies ... all you geezers still on here ?

    Remember when Johnny was a moderator? Remember when Johnny got efilive? 2010 was a long time ago :D
  5. hondarider552

    Ladies ... all you geezers still on here ?

    New members need to start a thread in the introductions area... Thanks... :spit: I miss going to Mike L's because you would meet me there in the Kodiak, go drifting, then dinner and do some 80 to 0 brake tests, I still haven't been something that big that goes that fast since haha
  6. hondarider552

    LLY: Lb7 lly turbo swap.

    You will like that 75 a lot more than a lame stock LLY turbo :D
  7. hondarider552

    LLY: Lb7 lly turbo swap.

    What would be helpful is take advice from those who me posted above that you will have a very hard time doing this yourself.
  8. hondarider552

    LBZ: Water pump

    Pinned pump, if the seal aint leakin, don't replace it. ive done a lot of water pump jobs and never replaced the front main, with 4x the mileage. I wouldn't go with a fluid damper as its heavier than stock and we already have crank issues, but that is another topic.
  9. hondarider552

    5K Budget Long Block Suggestions

    I opted to reuse my stock lb7 pistons, my engine had 145k on it, and was totally stock, I sent then to socal diesel had then delipped and shaved, threw them back in. They c worked great for me and held up to 15k miles of beating the crap out of them, lots of spray and lots of EGT.
  10. hondarider552

    PPE manifolds & up pipes , Duramax store brand or??

    Don't act like you have never done it.. Want names and addresses so you can go after them? :confused:
  11. hondarider552

    PPE manifolds & up pipes , Duramax store brand or??

    Can't say how many times I've had stuff shipped to me, then shipped to members on here that live in California haha.
  12. hondarider552

    LB7: coolant leak

    2 bolt cover above the starter it's on the rear engine cover, looks like a football. Mine leaked right where you are saying. Merchant-automotive has a custom plate with an O-ring if you want to go that route. Factory is just a thin paper gasket.
  13. hondarider552

    5K Budget Long Block Suggestions

    But I still did it... If your smart about the build and assemble it yourself I see 5k being easily done.
  14. hondarider552

    5K Budget Long Block Suggestions

    It got me to 10.57 @ 135 and 1018hp.
  15. hondarider552

    LBZ Turbo break only works sometimes??

    Converter needs to be locked for the brake to work worth a crap.
  16. hondarider552

    LBZ Turbo break only works sometimes??

    Max vane tables, commanded boost at 0% throttle all have a role. I've had a brake work all the way down to 1200rpm in my last LBZ.
  17. hondarider552

    Things to do in Vegas?

    I just went to Vegas about a month ago for the last few days if the NFR... I remember the NFR and cowboy Christmas at the convention center, but we were supposed to go watch a live band at the MGM for the afterparty... My boss and I never made it to the MGM, or back to our origina...
  18. hondarider552

    Things to do in Vegas?

    I 2nd this. Oh, don't loose Doug, you'll find his mattress on top of Ceasars Palace.