Search results

Search the forum Search Articles
  1. duramaxzak

    ECM VATS Relearn:

    I have had to do this before and it worked. Leave the ignition on, and make sure you have a battery charger on it so the batteries don't drain down.
  2. duramaxzak

    Dhd axle spline

    I think your stuck using DHD axles only!
  3. duramaxzak

    LB7: Cheap Hooker Build Thread

    What kind of tire's are you running and what air pressure? Looks like you are not hooking up at all.
  4. duramaxzak

    LB7: Cheap Hooker Build Thread

    I have never tried 4th, I don't think I have enough ponies unless it was a really loose track.
  5. duramaxzak

    LB7: Cheap Hooker Build Thread

    3rd, 4lo, 4:10 gears and 315/70/17 BFG AT's. Im usually around 3700-4000 Rpm's.
  6. duramaxzak

    LB7: Cheap Hooker Build Thread

    That would be 3rd gear! I start in 3rd also.
  7. duramaxzak

    LB7: Cheap Hooker Build Thread

    The best set-up I found is to back t-bar bolts all the way out and make bump stop's so that your CV shafts level. So that the weight of the front of the truck is resting on the lower control arm's. Rancho 9000 shock's set on the stiffest setting also helps. Here's a video of my last pull, I put...
  8. duramaxzak

    LB7: Cheap Hooker Build Thread

    I would not recommend ratcheting the front suspension down!
  9. duramaxzak

    LB7: Cheap Hooker Build Thread

    I made these and they seem to be working well. I have my t-bars all the way down and set the stop height so my CV shafts are level.
  10. duramaxzak

    Looking for a torque plate

    I had heard before that one from a Big block Chevy would work, but have not verified this.
  11. duramaxzak

    Looking for a torque plate

    http://www.cylinderheadsupply.com/gm-66d.html
  12. duramaxzak

    LML Rods

    http://www.duramaxdiesels.com/forum/showthread.php?t=17664
  13. duramaxzak

    LB7: Fans and TCM Tune

    3rd gear start:thumb:
  14. duramaxzak

    LB7: New Motor Build Porn !

    Looks great! Need more pictures of the finished motor and exterior of the truck! :thumb:
  15. duramaxzak

    6 blade vs 11 blade compressor

    Fleece run's a 6 blade on there Billet S471 and seem's to good power.
  16. duramaxzak

    Funny!

    :roflmao:
  17. duramaxzak

    LMM: HSP Manifolds/up pipes

    Rick sells one for the LMM. https://profabperformance.com/jm2/index.php/our-products/duramax-lmm-2007-5-2010/product/4-coolant-line-relocation-fitting
  18. duramaxzak

    Fuelab lift pumps

    Maybe this will help, there are 2 out ports, 1 returns air/fuel to the tank, the other feeds the fuel line to the motor.
  19. duramaxzak

    Rear axle choice for 1/2 ton

    http://m.ebay.com/itm/221480742890?nav=SEARCH
  20. duramaxzak

    Hitch suggestions

    Here's one that's cut out of a solid plate steel! Good price also. http://www.cumminsperformanceparts.com/adslhi.html
Top Bottom