Search results

Search the forum Search Articles
  1. duramaxzak

    Info: DIY VGT build

  2. duramaxzak

    Info: DIY VGT build

    Got the Wetzel wheel today. Here's a comparison between the stock size Wetzel wheel vs. the 68mm wheel.
  3. duramaxzak

    Duramaxzak 2.6 pulling truck build

  4. duramaxzak

    Duramaxzak 2.6 pulling truck build

    Made a new dual fueler bracket to move CP3 to A/C mount location.
  5. duramaxzak

    switch panel

    I used this overhead switch panel last year, but have been thinking about making one were the radio is. I used this fuse/relay block to wire my fuel pump, fan's and A2W pump...
  6. duramaxzak

    Duramaxzak 2.6 pulling truck build

    Heads were machined before I got them, not sure if the intake side was ever done.
  7. duramaxzak

    Duramaxzak 2.6 pulling truck build

    I purposely put on backwards for more room for 4" intercooler piping. The front to back alignment was fine, but it was like the intake needed to drop down in the valley of the heads more.
  8. duramaxzak

    Duramaxzak 2.6 pulling truck build

    Performance accessories 183, it's for the gas trucks.
  9. duramaxzak

    LB7: Iso 2002 cluster

    I have a couple of 01-02 diesel clusters. $150 shipped for one.
  10. duramaxzak

    Duramaxzak 2.6 pulling truck build

    Body lift installed on cab and bumper relocated.
  11. duramaxzak

    Duramaxzak 2.6 pulling truck build

    Made a mount for the 12V hydraulic pump for the steering and brakes. Oops, This one is upside down!
  12. duramaxzak

    Duramaxzak 2.6 pulling truck build

  13. duramaxzak

    Duramaxzak 2.6 pulling truck build

    Been working on my new A2W set-up also.
  14. duramaxzak

    Duramaxzak 2.6 pulling truck build

    Finally got my Wagler intake installed. Turned out to be kind of a PITA! I had to slot the bolts holes with a die grinder to be able to get the mounting bolts in. Not sure because my heads have been milled to much or intake machining off.
  15. duramaxzak

    Info: DIY VGT build

    I plan on doing some porting and polishing on it. Not sure when I'm going to get around to it right now, getting pulling truck done is priority right now!!! Oh, and I know what you mean about that Eric guy!:D
  16. duramaxzak

    Borg-Warner's New S300SX-E (S369)

    He has the .90, its his Dailey driver with stock injectors and fuel. He thinks it spools better than the billet S366 did that it replaced.
  17. duramaxzak

    Borg-Warner's New S300SX-E (S369)

    I know someone who just installed one if these with Wcfab install kit on a LLY if you have any ?'s I can ask him for you Tom.
  18. duramaxzak

    Info: DIY VGT build

    The stock size I bought is a Wetzel wheel. It will probably dyno it after its installed.
  19. duramaxzak

    Info: DIY VGT build

    This is the truck it will be going on. http://www.duramaxdiesels.com/forum/showthread.php?t=68162
  20. duramaxzak

    Info: DIY VGT build

    I want to be able to pull my 25ft gooseneck trailer with it also for now and thought the 68 might be a little much for that. I will keep the 68 and see how it performs with the stock size first. It's tuned by Eric (Wisconsinhick1) right now and will be having him update the tunes for the new...
Top Bottom