Search results

Search the forum Search Articles
  1. duramaxzak

    12mm or dual fueler

    Because you like to party!:b-day:
  2. duramaxzak

    12mm or dual fueler

    Read post #30 from Mark. http://www.duramaxdiesels.com/forum/showthread.php?t=68774&highlight=12mm+exergy&page=2
  3. duramaxzak

    12mm or dual fueler

    Kind of depends what your end goals are. If you never plan on going over 800-900hp I would go 12mm, if you think some day your going to want more than 1k hp I would do a dual fueler. I remember reading that each CP3 pump takes about 20hp to run, so at say 800hp with one 12mm pump you could make...
  4. duramaxzak

    W/S. Stock appearing IHI boost numbers?

    Here's an old video of it. https://youtu.be/oONgaVcCpKI
  5. duramaxzak

    W/S. Stock appearing IHI boost numbers?

    I was running 45% injectors with 10mm pump.
  6. duramaxzak

    Happy 4th

    Happy 4th all! :patriotic2:
  7. duramaxzak

    Ford 6.7

    Don't they have the same CP4 problems as the LML's do?
  8. duramaxzak

    Difference in Frames

    I have a 02' and 05' CCSB 4x4 rolling chassis I would sell if not. Would sell with axles or bare.
  9. duramaxzak

    Yukon 30 spline axles any good?

    Yukon makes make 2 different grades of axles, 4340 are stronger.
  10. duramaxzak

    GM being sued over Duramax engine emissions:

  11. duramaxzak

    Wire harnesses

    I have a 05 truck side engine harness and fuse box. Plugs into the fuse box and runs to the motor, tranny, t-case, ECM and tcm. $300 for harness and fuse box.
  12. duramaxzak

    Duramaxzak 2.6 pulling truck build

    Ended up upgrading to 6 piston calipers. 4 piston were a little iffy being able to hold truck at the line while building boost.
  13. duramaxzak

    Kat's new Broom

    Very nice broom stick! :thumb:
  14. duramaxzak

    Gauge cluster repair.

    I have used this guy about 6 times and have always had great results and super fast turn around time.
  15. duramaxzak

    Duramaxzak 2.6 pulling truck build

    I bought it off eBay already cut to length. Search 8" aluminum tube.
  16. duramaxzak

    Duramaxzak 2.6 pulling truck build

View older results
Top Bottom