Search results

Search the forum Search Articles
  1. skintback

    546/925 LBZ With Acid Tune

    Small things that come to mine bigger injector tips a shot of nitrous or a modded fuel pressure regulator
  2. skintback

    LLY: Made 540hp/951tq in my LLY!

    Still not bad for only holding 16K rail if you can get up to hold around 20K+ you should see a nice gain.
  3. skintback

    Ever been a group buy on rods?

    I may be in on some QA1's
  4. skintback

    09-10 Allisons anything changed?

    The 2010 i put a transgo jr in was the same as the 09's that i have done. The only difference was the stock trim valve springs were orange on the 10's and the 01-09's are black. Mike will hook you up :thumb:
  5. skintback

    LBZ: Reluctor rings

    I have both tore down and to me they look the same
  6. skintback

    Info: Oil Pump vibrations???

    I have one of the dpr oil pumps not sure if it was one of the first six and no noise so far but i only have 12k miles on it no shims in the relief and i drilled out all the ball and springs on the oil jet bolts i see hot wot runs at 75-80. I did have to grind off some on my front cover to...
  7. skintback

    Is this LLY priced right

    It looks to be in really good shape well taken care of. The dealer down here has a 06 lbz LS 4x4 reg cab 17K miles on it very clean but they want 27,800 :spit: i said wow why so high on the price the manger said because of the new motor coming out with all the emission stuff on them people...
  8. skintback

    New best

    Nice that is awesome to here :thumb:
  9. skintback

    Crankshaft ID: LBZ vs. LLY

    So how goes putting lb7 pistons on a lbz crank and rods? Just balancing right?
  10. skintback

    Injector copper washer thickness?

    Part number 5086895AA 06 dodge cummins injector copper washers
  11. skintback

    Injector copper washer thickness?

    You would have to go past .200 that is what the glow plug tip sits down and without a washer the tip of injector only sticks out to i believe .175-.180
  12. skintback

    Made 632hp today

    Nice #'s I wonder if the 85 over pump from II would be comparable
  13. skintback

    Injector copper washer thickness?

    Just thinking out loud after a few drinks :eek:
  14. skintback

    Injector copper washer thickness?

    Well this is what i have found a washer out of a 06 CR cummins is .065 and a stock washer out of a LBZ is .080 these are used ones and my gauge is old but gives you a idea of what i got. With the CR washer in the head the injector tip sticks out .150 and the stock lbz one sticks out .130 this...
  15. skintback

    12.4 @ 111 mph

    Nice Get back out there give it some more :D
  16. skintback

    Injector copper washer thickness?

    Top secret i guess :secret:
  17. skintback

    Injector copper washer thickness?

    How much of a benefit would it be to install a thinner injector copper washer to keep the spray pattern more in the piston bowl? Next would be how thin can you go and where? The stock washer is around .078 i think and a lbz tip is out about .135 along with the glow plug is out about .200...
  18. skintback

    OH NO!!!! Wrecked my truck doing a burnout...All on Vid

    :rofl:
  19. skintback

    My buddies INSANE d-max subwoofers!!!

    Nothing wrong with that :D
  20. skintback

    SoCal Diesel Super Damper

    Doesn't this require a install tool kit of some sort A big hammer :joker:
Top Bottom