Search results
-
LBZ: Replaced #3 injector no start???
The injector needs to be programed to the ecm with a tech2 on the 06 and newer. sometimes you can get away without having to do that -
Industrial Injection Pumps
I put a 85 over on a 06 dodge and it picked up 6+mph in the 1/4 but now after about 10K miles it's not holding rail very good.- skintback
- Post #6
- Forum: Duramax Hard Parts
-
Crower camshafts
Looks like you still need to have it keyed- skintback
- Post #19
- Forum: Duramax Hard Parts
-
-
Mahle Cast Cut & Coated Pistons
What would be the price with out being cut?- skintback
- Post #2
- Forum: Creatures of the Night Performance - 443-907-4838
-
To much rail psi an leaking injectors?
Four of the injectors are brand new the other four have some miles on them they all leak so is this just me?- skintback
- Post #5
- Forum: Duramax Hard Parts
-
To much rail psi an leaking injectors?
I'm not talking about the return line leaking. At idle i have to unplug the reg an rev it up a few times it will do it very little but they will leak- skintback
- Post #4
- Forum: Duramax Hard Parts
-
To much rail psi an leaking injectors?
Since i'v added dual lbz pumps i had to turn down the command rail pressure as all 8 injectors would weep fuel on a WOT run to the best i can tell the fuel is coming from the little hole on the injector below were the line screws on i think. Can i weld this hole up? I had to go from running 27K...- skintback
- Thread
- Replies: 4
- Forum: Duramax Hard Parts
-
-
Low rail pressure on race tune?
The water fuel separator is the one that gets clogged first- skintback
- Post #22
- Forum: Duramax Tuning, Logging, and Gauges
-
Low rail pressure on race tune?
I would start with new filters being you can not hold 26k on your small tune and then go from there filters 40 injector 375 cp3 700- skintback
- Post #20
- Forum: Duramax Tuning, Logging, and Gauges
-
-
Single cp3
That's very impressive for a stock LBZ pump in a CC 4x4 what other mods?- skintback
- Post #19
- Forum: Drag Racing
-
How to tune for less smoke on take off?
How do you tune the smoke down on a none boosted launch what table/tables would i be looking for? The reason i ask is with dual pumps it's loss some bottom end with to much fuel only running a 2900pw with stock turbo/sticks lly right now it will clean it up ok but on take off it's to much fuel...- skintback
- Thread
- Replies: 4
- Forum: Duramax Tuning, Logging, and Gauges
-
-
-
2 MPG gain with bolt-ons
I sure could go for 2 more mpg Do you have any install pics on a LLY?- skintback
- Post #3
- Forum: Dirty Hooker Diesel - Owner: Tony Burkhard (989)47
-
-
-