Search results

Search the forum Search Articles
  1. T

    New setup is done

    Send them to S&S or someone and have them checked? Might cost you a couple hundred but you'll have proof they're bad.
  2. T

    Bad injector?

    Operating temp none of them are even +-1 hardly. I'm sure I'm worrying about nothing lol just got the motor done so I'm freaking out lol
  3. T

    Bad injector?

    Mine cleans up at operating temp and the balance rates settle down too
  4. T

    Bad injector?

    I'm guessing it's the 100 overs causing the haze
  5. T

    New setup is done

    I've got 100% injectors too. It's the first time it's been cold since the motor got done. Makes me feel better I thought an injector was bad. I'm sure forged pistons don't helpbthe haze either.
  6. T

    New setup is done

    So the haze is normal with 16.5 compression? Mine hazes pretty good below 50* I thought an injector was bad lol but it idles normal and doesn't have any knocks or ticks. One injector is borderline when cold but at operating temp it's 0.8
  7. T

    Water meth

    Is anybody running water meth on their built motors? Is there much of a benefit?
  8. T

    Bad injector?

    That's what I'm wondering. There's no ticks,knocks and the idle is normal
  9. T

    Bad injector?

    Since its been colder in the mornings here 40 degrees or so. I noticed my truck smokes a blueish white when warming up. If you check the balance rate cold which you're not suppose to. Injector 3 is +4 Now when it gets to operating temp no smoke and injector 3 is +.08. Now the smoke haze doesnt...
  10. T

    Fleece 63mm/68mm or DT 64mm?

    He's Right! But you can stretch the factory bolts about a 1/16th of an inch and cause a nice leak.
  11. T

    Fleece 63mm/68mm or DT 64mm?

    Ahh hell again! Didn't we deal with a guy a couplle weeks ago who actually attempted to build his own tranny and dicked it all up?
  12. T

    LBZ: My turn has come...

    I use LDS but I'm sure Exergy is still one of the top companies
  13. T

    LBZ: My turn has come...

    I just spent 28k on a full build. But it took me a year to collect parts. I made sure all the important parts were new and when I found a deal on here for a turbo or whatever I snagged it up. So keep that in mind on external parts. Personally if you use it for work I'd shoot for around a 700 to...
  14. T

    Built motor sluggish

    I think could be wrong though that a 35in raises a 3.73 close to a 3.42 so 4.10 would be close to a 3.73. Could be wrong though just what I've heard from old timers
  15. T

    Built motor sluggish

    I'm gonna check all the bolts again tomorrow!
  16. T

    Built motor sluggish

    The vanes got down to 7% when I got on it and it seems like tighting that bolt might of helped some. At 1500rpm at 70mph it's has 5 to 6lbs of boost and spools to 10 pretty easily. I don't know what normal boost should be at thatt rpm and speed. As far as the smoke I couldn't tell since its dark...
  17. T

    Built motor sluggish

    I got 35in tires and yea we've talked some more he thinks it's just my setup
  18. T

    Built motor sluggish

    It's Marks turbo so I'd hope the vanes is right. I haven't logged them but I monitor them. At idle they're around 62% and 38% or so cruising down the road at 70mph
  19. T

    Built motor sluggish

    Yes heavy black smoke tune one will black out a lane of traffic
  20. T

    Built motor sluggish

    Update did find a bolt on the exhaust manifold that was backed all the way out. Could this be the issue?
Top Bottom