Search results

Search the forum Search Articles
  1. BlkMax

    New Okie

    Welcome!
  2. BlkMax

    New guy from indiana here

    Welcome!
  3. BlkMax

    Favorite source for turbos

    Depending on what you are looking for, you might want to talk to Kat.
  4. BlkMax

    EGT's with twins??

    I did the same thing and used 1/8" tubing. It was too small for Alaska-it freezes. I need to change it out to 3/16" or 1/4" tubing. I also did not do the coils-I didn't want a fluid trap. Mine is tapped off the up-pipe, and ran up the firewall making sure I can drain the exhaust moisture back...
  5. BlkMax

    Lets see your toys

    Here are some of mine: Truck w/ '86 Airstream Truck w/ '01 Summer Wind slide-in Bikes: '08 ZX-14 Ninja...making about 180hp or so :thumb:, '07 Honda ST1300 Sled: Started life as a '01 700 RMK, is now a full mod sled making about 150hp The last pict is when I was grass dragging the sled prior...
  6. BlkMax

    T-case making oil???

    That is actually good news! I do not have to deal with the tranny. Thanx Mike :thumb:
  7. BlkMax

    T-case making oil???

    This is a question on a 1997 GMC 4x4 Suburban with a NP243, and the 4 speed auto. I bought it for my kids with 200K miles, and have been slowly going through the rig. When I went to change the oil in the t-case, I removed the FILL plug and had a LOT of red fluid drain from the fill. This...
  8. BlkMax

    Help: Paint advice?

    The recoat time is typically a maximum time that you can wait and still get a chemical bond with the first coat of paint. I would just use some good judgment based on how the paint is hardening....all of the recommendations from the manufacturer will change with air/surface/paint temperature...
  9. BlkMax

    DTC U1000 Question

    Thanx for the help.
  10. BlkMax

    DTC U1000 Question

    No doubt :mad: I was driving by the EGT and my ear :rofl:...and the other folks on the road.
  11. BlkMax

    DTC U1000 Question

    I have been throwing DTC U1000. I have also had "RFA #2 Batt Low" (in all my research I have not found out what that means) show up on the mil. I also have a "pause" on the instrument cluster during startup. The cluster will not come up when the truck is started, but will eventually come up...
  12. BlkMax

    ProParts gauges

    I use the analog inputs from pressure transmitters just for the boost and drive pressures (1 for each). I cannot use the stock boost transmitter because the HTT makes more boost than the stock transmitter can handle.
  13. BlkMax

    ProParts gauges

    FWIW, I have been running AeroForce: http://www.aeroforcetech.com/products_interceptor.html I like them a lot when I am not logging with EFILive. When I log, I have the EGT, boost, drive pressure, and fuel pressure analog inputs dual wired into the EFI analog inputs (any sort of electronic...
  14. BlkMax

    Finally...IT IS COMPLETE!

    On another note: I want to thank all the folks who answered questions on lifts back in January. The shop and the equipment has been a long process for me, and this board has been a great help in selecting equipment that I wanted, but have not used or was familiar with initially. Thank you all...
  15. BlkMax

    Finally...IT IS COMPLETE!

    Thank you. The paint is Devoe Bar-Rust 236, it is a good two part epoxy paint, and resistant to most oils and stuff. It has a hard time with acetone, lacquer thinner, MEK, and stuff like that. BE CAREFUL, it requires a respirator with good cartridges even if you are doing brush/roller...
  16. BlkMax

    Finally...IT IS COMPLETE!

    Oh well. If I really want to be in the 10's quick, I can always break out the ZX-14.:thumb:
  17. BlkMax

    Finally...IT IS COMPLETE!

    Do that. I am jealous of your twins. Now I just need some new rods, cut pistons, and an S480, and maybe some 60 overs...OH WELL....:rofl:
  18. BlkMax

    Finally...IT IS COMPLETE!

    Thanx Kat..... So does she :D, but her is still used a "little" for parts storage. :happy2:
  19. BlkMax

    Finally...IT IS COMPLETE!

    That should not be too much of a problem, the paint is an industrial epoxy used to coat the inside of petroleum tanks...among other things... I wanted a oil resistant coating.....and I do not like the rainbow sprinkles that come in the DIYS kits from Lowe's.
  20. BlkMax

    Finally...IT IS COMPLETE!

    Thank you. Mama bear has the old garage that was too small to even get the truck into. If I would have taken out the bikes and the sled. There was a time when the toys were worth more than her car, and the toys were easier to steal...the car went outside and never got back in. She will be...
Top Bottom