Search results

Search the forum Search Articles
  1. Bustedknuckles

    Odd Fuel Leak!!!

    You dont need to take the valve cover off. Just loosen and re-tighten that line and tighten it like crazy. Unless its really corroded it should be fine.
  2. Bustedknuckles

    My "build" thread.

    I thought about that but I just don't quite like how they look from the side. Plus I get in the bed of my truck too much. At least I get some fresh paint for free, it was starting to get some rock chips and a couple small dents. The funny thing was that it was actually a real good friend who has...
  3. Bustedknuckles

    My "build" thread.

    Full circle I guess! Got rearended turning in my road last friday after work. :(
  4. Bustedknuckles

    oil pressure issues

    Anything decided on this?
  5. Bustedknuckles

    truck towing pictures...

    But they can do almost as much without dropping a valve or the turbo exploding or the entire fuel system grenading and then warranty being voided because of " water in fuel". Lolol
  6. Bustedknuckles

    Ford.......

  7. Bustedknuckles

    Anyone worked with Ford 6.4

    I wouldn't recommend one at all. Ive seen a few crack pistons, stock or tuned, spin rod bearings and any number of other issues listed here. Id buy one with a 6.0 and start gathering stuff for a cummins swap.
  8. Bustedknuckles

    Red Alto or Rybestos

    If its poor how can they offer a lifetime warranty on the converter and 2 year unlimited mileage on the trans at 1000+ horsepower?
  9. Bustedknuckles

    Red Alto or Rybestos

    Yes, chocolate chip if you have one. Lol. No I just thought it was odd that its held up perfect for him and another friend with over 700 at the wheels and if they are junk why is it the main converter TRE and Firepunk sell? Unless they dont have the dmax thing figured out.
  10. Bustedknuckles

    Red Alto or Rybestos

    Junk that has held 833 hp and 1300+ ft lbs of torque in my brothers daily driven cummins for over 2 years....
  11. Bustedknuckles

    oil pressure issues

    Nothing, if you have low oil pressure verified with a mechanical gauge and your oil is good i guess it could be a worn oil pump but its probably the bearings.
  12. Bustedknuckles

    oil pressure issues

    Shot main bearings....
  13. Bustedknuckles

    Needing some yoda wisdom here guys

    Where you located man? Theres a some good threads out there with pictures and everything. Theres a real good one on duramaxforum.
  14. Bustedknuckles

    Needing some yoda wisdom here guys

    That means the water pump is working. Or you have insane coolant system pressure. But at this point id say your head gaskets are blown for sure, sorry!
  15. Bustedknuckles

    Needing some yoda wisdom here guys

    Ok. Take out the little bolt on the top of the thermostat housing and fill the truck with water till it comes out there. Then take off the hose and try again with the cap left off the resivor. It does sound like you have majorly blown head gaskets though....
  16. Bustedknuckles

    Needing some yoda wisdom here guys

    Exactly! Pull off a heater hose and start it. If no coolant comes out you have a spun water pump impeller.
  17. Bustedknuckles

    EFILive Duramaxtuner vs Ridge Runner

    You guessed it! Can't complain too much about the tuning, it does seem conservative but thats part of safe tuning. $300 for that simple of a change seemed ridiculous to me but its a done deal......
  18. Bustedknuckles

    EFILive Duramaxtuner vs Ridge Runner

    I wish I would have known this a long time ago. $300 to change the tuning for 30% over injectors 0_0
  19. Bustedknuckles

    LBZ: Engine Build

    Sucks that it broke on you but now you get a built engine, so you've got that going for you which is nice. Lol. You could send your injector tips to extrude hone and get them honed out for around $300 for the set....
  20. Bustedknuckles

    S475 TCT single

    On blow.
Top Bottom