Search results
-
B
Won't start after complete rebuild.
It runs. I swaped the ECM turned it on pumped the primer till hard, and it fired right up. I got a oil leak coming out around the starter. It lost about a quart in the half hour I let it run. Could my dipstick tube be cracked? Also I got a coolant leak at the oil cooler where the 90 degree piece... -
B
Won't start after complete rebuild.
I'll try it this afternoon, or tomorrow. I'm trying to get some dirt work finished up on my place and get ready for some grass seed. -
B
Won't start after complete rebuild.
Not yet. I am working on getting the efi live. I started taking the ECM out of the truck to put the original back in, even though it will have a sled pulling tune on it. I had slot of other obligations today. -
B
Won't start after complete rebuild.
Just so I know, what all conditions need to be met for the truck to start? I will try the vats after work tonight. I will also use my test light to see if the injectors are getting the signal etc. I'm mainly asking for the efi live say I should see xxx amount of rail pressure, this many counts... -
B
Won't start after complete rebuild.
Yes sir the security light is blinking. It comes on sometimes during cranking. The truck is a 02 and has set for 5 years without a engine. I took on the job in February. I'm burnt out on it and want to get it done. -
B
Won't start after complete rebuild.
No sir. How do I go about doing it? -
B
Won't start after complete rebuild.
I'm trying to get the original efi live and computer that they tuned the truck with, but the owners son could care less. -
B
Won't start after complete rebuild.
I sent all 8 injectors and cp3 to Columbus diesel about a year ago. They said it was all good and charged me 400. I doubt the really checked them, just put new prongs on them and sent them back to me. -
B
Won't start after complete rebuild.
I will do that. I will have to get ahold of another buddy to see if I can use his efi live. Do I need another license since I changed CPU? I know I can use it to read pids on any truck. -
B
Won't start after complete rebuild.
I have a gauge, but the truck has a fass pump on it. I opened the bleeder while it was running and I have a good supply of pressure. I checked it at the gauge port and same thing. Hand primer gets so hard. I can't pump It. I have checked several times for air. It seems as if it's all out up to... -
B
Won't start after complete rebuild.
I am helping a friend out, I can't seem to get it to fire. I have bleed the fuel lines/fuel filter. Keep pumping it will it's cranking and nothing. I tried for a hour. Old motor and computer were tuned with efi live. I used CPU that came with motor I rebuilt. Do I need to use original computer...