Search results

Search the forum Search Articles
  1. Mogman

    Stand alone ECM need start circuit?

    Nobody???
  2. Mogman

    Stand alone ECM need start circuit?

    08 LMM
  3. Mogman

    Silicone hoses on straight pipe?

    Well I'll be, I mentioned to the ol lady I was going to have to buy a bead roller and she said "why? you already have one" then she drug out this TEXTO (Peck Stow) beader from her side of the storage building, she has worked for years for different auctioneers and she always says when they start...
  4. Mogman

    Stand alone ECM need start circuit?

    The question is does the ECM need to know you are trying to start the engine or can I abandon the stand alone harness start wires and do my own start circuit?
  5. Mogman

    Silicone hoses on straight pipe?

    Would the answer be different for the intercooler lines?
  6. Mogman

    Silicone hoses on straight pipe?

    Will it roll a bead in stainless? EDIT, I guess not, should have looked at JEGS first, maybe I will head down to the local machine shop and ask.
  7. Mogman

    Silicone hoses on straight pipe?

    Radiator hoses, but I will probably have the same issue with the intercooling pipes.
  8. Mogman

    Silicone hoses on straight pipe?

    I am wondering if silicone radiator hose will not push off of straight pipe? I am having to cut the cooling pipes to length so they do not have the bead that normally keeps the pipe from pushing off of the pipe, I am using T bolt clamps, I am not able to find rubber hoses in the configurations I...
  9. Mogman

    Reading DSP-5 and de-tuning??

    Also I am wondering if I should replace the ECM before investing $125 in a license, it is hard to see but there are some fairly deep dents in the donor ECM from the accident, it seemed to run and function fine when it was test run. And if I replace the ECM with a used one what other than loading...
  10. Mogman

    Reading DSP-5 and de-tuning??

    Also where is the EFI live section, I seem to not be able to find it anymore...
  11. Mogman

    LMM fan options?

    This one is after market and plastic, the one referenced above was a 9 blade I believe, not going to chop up a classic fan
  12. Mogman

    Reading DSP-5 and de-tuning??

    OK THANKS for all the input, so what I guess now the question is, should I retain DSP-5 (IE how hard/expensive is a DSP-5 "tune" to create) AGAIN as I understand one tune will be or can be a "high idle" which would be good for the hydraulic winch etc. Considering all the mods made to the donor...
  13. Mogman

    Reading DSP-5 and de-tuning??

    THANKS!! If it is locked can I flash it over with DSP-5, if not what if anything should I do with the DSP-5 hardware/wiring? With a 4.91:1 gear ratio and 37" tires I think I really do need 6th, not that I plan to blast down the highway at 85 like I do with my 08 3500HD/LMM
  14. Mogman

    Reading DSP-5 and de-tuning??

    Well I am only a couple weeks (hopefully) to shooting some juice to my LMM re-powered Humvee, the original ECM had DSP-5 or at least a switch, I did not have EFI-live when I test fired the wrecked truck, I have some questions. 1, I understand (I could be wrong) that the ECM could be password...
  15. Mogman

    LMM fan options?

    I did find a 20" 11 blade fan and clutch (2000 6.5L) that could be cut down, ordered the clutch just to see if it has the same threads as the hub as I could not find that info. EDIT looks like the 6.5L fan might fit on the LMM clutch so I ordered one, also I moved the hoses around a bit and...
  16. Mogman

    LMM fan options?

    Did not thing you were trying to be a dick, yes I looked at the factory one and nothing was available( as far as parts go), they obviously did a TON of redesign to get it in there, I also looked at several other conversions and did not like them, for 50 years I have been "rolling my own" and...
  17. Mogman

    LMM fan options?

    Because the water pump suction is on the driver side on the LMM it has to cross over the front differential so yes an 18" fan is all that will fit, I also have my engine lower in the chassis so I can use a 2" body lift instead of a 3 1/2 - 4" lift like the other conversions which IMHO looks like...
  18. Mogman

    LMM fan options?

    Was the Dmax the only H1 built in 2006? looks like the parts are not available anyway, what I found when looking for motor mounts, I am having no luck searching for Waid wolf
  19. Mogman

    LMM fan options?

    Thanks, but this conversion has nothing at all to do with a factory H1, I am sure I did everything differently, they had much more capital to do allot more retooling, I also have no idea where to start there seems to be very little information about the Dmax H1 other than they de-tuned it so...
  20. Mogman

    LMM fan options?

    I starting to fit the stack (radiator, trans/steering cooler and intercooler) on my Humvee/LMM conversion and there is not much room for a fan, I have seen other conversions use cut down OEM fans but I only have enough clearance for an 18" fan and that does not leave much blade because of the...
Top Bottom